The Optimal Design Method and Standardized Mathematical Model of Tooth Profile Modification of Spur Gear

The paper reports a tooth profile modification method of spur gear. After establishing a standardized mathematical model for optimized tooth profile and simulating meshing process with ANSYS finite element analysis, we obtained 625 groups of gear models with different modification parameters. The gr...

Full description

Bibliographic Details
Main Authors:	Wenjie Mei, Jingzhou Na, Fan Yang, Guike Shen, Jiawei Chen
Format:	Article
Language:	English
Published:	Hindawi Limited 2016-01-01
Series:	Mathematical Problems in Engineering
Online Access:	http://dx.doi.org/10.1155/2016/6347987

Similar Items

A Mathematical Model for Parametric Tooth Profile of Spur Gears
by: Guodong Zhai, et al.
Published: (2020-01-01)

Spur Gear Tooth Topology Optimization: Finding Optimal Shell Thickness for Spur Gear Tooth produced using Additive Manufacturing
by: Adis J. Muminovic, et al.
Published: (2019-08-01)

Analysis of Modification of Spur Gear Profile
by: Rafał Gołębski, et al.
Published: (2018-01-01)

A study of parametric tooth profiles for spur gears and bevel gears
by: ZHANG,HUI-LONG, et al.
Published: (1991)

Spur gears with longitudinal tooth profile modification mesh creating which is suitable for stress analysis
by: Tadeusz Nieszporek, et al.
Published: (2017-01-01)

Tooth contact analysis of spur gears. Part 1-SAM analysis of standard gears
by: Creţu Spiridon, et al.
Published: (2017-01-01)

The optimal design of gear profile for the spur gear
by: JHUANG,BO-JYUN, et al.
Published: (2015)

Tooth Surface Failure of Straight Spur Gears
by: Nadano, Hiromasa
Published: (2017)

Tooth contact analysis of spur gears. Part 2-Analysis of modified gears
by: Pop Nicolae, et al.
Published: (2017-01-01)

An Optimal Choice of Profile Shift Coefficients for Spur Gears
by: Zoltán Tomori
Published: (2021-05-01)

Optimization Design on Tooth Trace and Profile Modification of Gears for the Loading Large Gear Reducer
by: Tsung-Che Hsieh, et al.
Published: (2014)

Optimization of Tooth Root Profile Using Bezier Curve with G2 Continuity to Reduce Bending Stress of Asymmetric Spur Gear Tooth
by: Vaghela Priyakant, et al.
Published: (2018-01-01)

Comprehensive Modification Technology of Involute Spur Gear Based on Optimal Transmission Performance
by: Guopeng Zhang, et al.
Published: (2018-01-01)

Power loss analysis in altered tooth-sum spur gearing
by: Sachidananda H. K., et al.
Published: (2018-01-01)

Power loss analysis in altered tooth-sum spur gearing
by: Sachidananda H. K., et al.
Published: (2018-01-01)

EFFECT OF RIM THICKNESS ON THE ROOT STRESSES OF SPUR GEAR TOOTH
by: Durmuş GÜNAY, et al.
Published: (1997-01-01)

Research on the Design and Modification of Asymmetric Spur Gear
by: Xiaohe Deng, et al.
Published: (2015-01-01)

Simulation of Gear Shaving with Tooth Profile Modification and the Tooth Contact Analysis
by: Kai-Wei Jin, et al.
Published: (2007)

A photoelastic study of stress distribution in a spur gear tooth
by: Wang, Kuo Chang, 1924-
Published: (2014)

Spur Gears Static and Dynamic Meshing Simulation and Tooth Stress Calculation
by: Jammal Ali, et al.
Published: (2015-01-01)

Study on stress intensity factors for crack on involute spur gear tooth
by: Jian Cai, et al.
Published: (2015-03-01)

Tribological behavior of coated spur gear pairs with tooth surface roughness
by: Huaiju Liu, et al.
Published: (2018-01-01)

Characteristics Study of the Tooth Profile Modification of Cycloid Gear
by: Yu-Hsin Chang, et al.
Published: (2017)

Tooth Profile Modification and Stress Analysis for Micro Gear
by: Liu,JinFa, et al.
Published: (2012)

Dynamic stresses for profile shifted spur gears
by: YOU,YUE-HAN, et al.
Published: (1991)

Research on Gear Shaving for Gears with Tooth Modifications
by: Liu, Jia-Hung, et al.
Published: (2008)

Mathematical model of energy efficiency in internal spur gears
by: Dobratić Predrag S., et al.
Published: (2019-01-01)

Effect of Tooth Profile Modification on Dynamic Tooth Load of Planetary Gear Train
by: Jiaming Zhou, et al.
Published: (2019-01-01)

Investigation of involute spur gear tooth by three-dimensional finite element method
by: LI,PIN-CHAO, et al.
Published: (1991)

The Interaction between the Tooth Wear and the Dynamic Loads in a Spur Gear Pair
by: Ah-Der Lin, et al.
Published: (2001)

Vibration characteristic analysis of spur gear systems under tooth crack or fracture
by: Xu Li, et al.
Published: (2021-03-01)

An Experimental Study of the Dynamic Response of Spur Gears Having Tooth Index Errors
by: Sun, Allen Y.
Published: (2015)

A differential evolution algorithm for tooth profile optimization with respect to balancing specific sliding coefficients of involute cylindrical spur and helical gears
by: Hammoudi Abderazek, et al.
Published: (2015-09-01)

Volume optimization of gear trains with spur gears using genetic algorithm
by: Marjanović Nenad, et al.
Published: (2017-01-01)

Mathematical Modelling of Involute Spur Gears Manufactured by Rack Cutter
by: Tufan Gürkan YILMAZ, et al.
Published: (2016-05-01)

Determination of Profile Shift Coefficients of Spur and Helical Gears
by: Chen, Wen-Yu, et al.
Published: (1996)

Determination of Profile Shift Coefficients of Spur and Helical Gears
by: Chen, Wen-yu, et al.
Published: (1996)

The role of pores and microstructural heterogeneity on the tooth root fatigue strength of sintered spur gears
by: Benedetti Matteo, et al.
Published: (2018-01-01)

Study of the tooth contact for high contact ratio spur gears with long tip relief
by: Pedrero José I., et al.
Published: (2019-01-01)

A novel tooth tip relief method for reducing micro-pitting of spur gears
by: Xiangyang Xu, et al.
Published: (2021-09-01)

Cannot write session to /tmp/vufind_sessions/sess_n75hujqv0g1ed8gimrjlcsphv1