Automated low-cost terrestrial laser scanner for measuring diameters at breast height and heights of plantation trees.

• Main Authors: Pei Wang, Ronghao Li, Guochao Bu, Rui Zhao
• Format: Article
• Language: English
• Published: Public Library of Science (PLoS) 2019-01-01
• Series: PLoS ONE
• Online Access: https://doi.org/10.1371/journal.pone.0209888

A terrestrial laser scanner is a fast, high-precision data acquisition device, which has been applied more and more to the research area of forest inventory. In this study, a type of automated low-cost terrestrial laser scanner was designed and implemented based on a SICK LMS-511 two-dimensional laser scanning sensor and a stepper motor. The new scanner was named BEE(developed by the department of Electronic Engineering, Beijing Forestry University), which can scan the forest trees in three dimensions. The BEE scanner and its supporting software are specifically designed for forest inventory. The specific software was developed to smoothly control the BEE scanner and to acquire the data, including the angular data, range data, and intensity data, and the data acquired by the BEE scanner could be processed into point cloud data, a range map, and an intensity map. Based on the point cloud data, the trees were detected by a single slice of the single scan in a plot, and the local ground plane was fitted for each detected tree. Then the diameter at breast height (DBH), tree height, and tree position could be estimated automatically by using the specific software. The experiments have been performed by using the BEE scanner in an artificial ginkgo forest which was located in the Haidian District of Beijing. Four 10 m × 10 m square plots were selected for the experiments. The BEE scanner scanned in the four plots and acquired the single-scan data, respectively. The DBH, tree height, and tree position of the trees in the four plots were estimated and analyzed. For comparison, manually-measured data was also collected in the four plots. The trunk detection rate for all four plots was 92.75%; the root mean square error of the DBH estimation was 1.27 cm; the root mean square error of the tree height estimation was 0.24 m; and the tree position estimation was in line with the actual position. The scanner also was tested in more natural forest in the JiuFeng Forest Park. Two plots with a radius of 5 meters were scanned. Eleven trees in the plot with a flat ground were detected and DBH were estimated. But tree detection was failed in the other plot because of the undulating ground. Experimental results show that the BEE scanner can efficiently estimate the structure parameters of plantation trees and has good potential in practical applications of forest inventory.