The assessment of the process of drawing a cylindrical workpiece without pressing with alternating strain of the workpiece flange

The development of a method for drawing cylindrical parts without pressing the workpiece flange, which allows reducing the cost of production due to the use of dies without a fit ring and single-acting presses. The performed research revealed that this method results in obtaining cylindrical parts w...

Full description

Bibliographic Details
Main Authors:	Arhat Roman, Shchetynin Viktor, Puzyr Ruslan, Savelov Dmitry, Haikova Tetiana
Format:	Article
Language:	English
Published:	EDP Sciences 2021-01-01
Series:	E3S Web of Conferences
Online Access:	https://www.e3s-conferences.org/articles/e3sconf/pdf/2021/56/e3sconf_icsf2021_07019.pdf

id	doaj-2db87089067d49f79e694eea7a1bd5c6
record_format	Article
spelling	doaj-2db87089067d49f79e694eea7a1bd5c62021-07-07T11:34:23ZengEDP SciencesE3S Web of Conferences2267-12422021-01-012800701910.1051/e3sconf/202128007019e3sconf_icsf2021_07019The assessment of the process of drawing a cylindrical workpiece without pressing with alternating strain of the workpiece flangeArhat Roman0Shchetynin Viktor1Puzyr Ruslan2Savelov Dmitry3Haikova Tetiana4Kremenchuk Mykhailo Ostrohradskyi National UniversityKremenchuk Mykhailo Ostrohradskyi National UniversityKremenchuk Mykhailo Ostrohradskyi National University CollegeKremenchuk Mykhailo Ostrohradskyi National UniversityKremenchuk Mykhailo Ostrohradskyi National UniversityThe development of a method for drawing cylindrical parts without pressing the workpiece flange, which allows reducing the cost of production due to the use of dies without a fit ring and single-acting presses. The performed research revealed that this method results in obtaining cylindrical parts with drawing ratios typical for pressing drawing. In this case, the different thickness of the finished product is several times less compared with the same type of semi-finished products obtained by drawing with a fit ring. Steel, aluminum and copper workpieces were researched. The best results were shown by more plastic materials. This method is not applicable for materials with the less than 0.25 mm thickness.https://www.e3s-conferences.org/articles/e3sconf/pdf/2021/56/e3sconf_icsf2021_07019.pdf
collection	DOAJ
language	English
format	Article
sources	DOAJ
author	Arhat Roman Shchetynin Viktor Puzyr Ruslan Savelov Dmitry Haikova Tetiana
spellingShingle	Arhat Roman Shchetynin Viktor Puzyr Ruslan Savelov Dmitry Haikova Tetiana The assessment of the process of drawing a cylindrical workpiece without pressing with alternating strain of the workpiece flange E3S Web of Conferences
author_facet	Arhat Roman Shchetynin Viktor Puzyr Ruslan Savelov Dmitry Haikova Tetiana
author_sort	Arhat Roman
title	The assessment of the process of drawing a cylindrical workpiece without pressing with alternating strain of the workpiece flange
title_short	The assessment of the process of drawing a cylindrical workpiece without pressing with alternating strain of the workpiece flange
title_full	The assessment of the process of drawing a cylindrical workpiece without pressing with alternating strain of the workpiece flange
title_fullStr	The assessment of the process of drawing a cylindrical workpiece without pressing with alternating strain of the workpiece flange
title_full_unstemmed	The assessment of the process of drawing a cylindrical workpiece without pressing with alternating strain of the workpiece flange
title_sort	assessment of the process of drawing a cylindrical workpiece without pressing with alternating strain of the workpiece flange
publisher	EDP Sciences
series	E3S Web of Conferences
issn	2267-1242
publishDate	2021-01-01
description	The development of a method for drawing cylindrical parts without pressing the workpiece flange, which allows reducing the cost of production due to the use of dies without a fit ring and single-acting presses. The performed research revealed that this method results in obtaining cylindrical parts with drawing ratios typical for pressing drawing. In this case, the different thickness of the finished product is several times less compared with the same type of semi-finished products obtained by drawing with a fit ring. Steel, aluminum and copper workpieces were researched. The best results were shown by more plastic materials. This method is not applicable for materials with the less than 0.25 mm thickness.
url	https://www.e3s-conferences.org/articles/e3sconf/pdf/2021/56/e3sconf_icsf2021_07019.pdf
work_keys_str_mv	AT arhatroman theassessmentoftheprocessofdrawingacylindricalworkpiecewithoutpressingwithalternatingstrainoftheworkpieceflange AT shchetyninviktor theassessmentoftheprocessofdrawingacylindricalworkpiecewithoutpressingwithalternatingstrainoftheworkpieceflange AT puzyrruslan theassessmentoftheprocessofdrawingacylindricalworkpiecewithoutpressingwithalternatingstrainoftheworkpieceflange AT savelovdmitry theassessmentoftheprocessofdrawingacylindricalworkpiecewithoutpressingwithalternatingstrainoftheworkpieceflange AT haikovatetiana theassessmentoftheprocessofdrawingacylindricalworkpiecewithoutpressingwithalternatingstrainoftheworkpieceflange AT arhatroman assessmentoftheprocessofdrawingacylindricalworkpiecewithoutpressingwithalternatingstrainoftheworkpieceflange AT shchetyninviktor assessmentoftheprocessofdrawingacylindricalworkpiecewithoutpressingwithalternatingstrainoftheworkpieceflange AT puzyrruslan assessmentoftheprocessofdrawingacylindricalworkpiecewithoutpressingwithalternatingstrainoftheworkpieceflange AT savelovdmitry assessmentoftheprocessofdrawingacylindricalworkpiecewithoutpressingwithalternatingstrainoftheworkpieceflange AT haikovatetiana assessmentoftheprocessofdrawingacylindricalworkpiecewithoutpressingwithalternatingstrainoftheworkpieceflange
_version_	1721315881522298880

The assessment of the process of drawing a cylindrical workpiece without pressing with alternating strain of the workpiece flange

Similar Items