A Comparison of Anisotropie Yield Criteria and Their Application to the Forming of Wire

A Comparison of Anisotropie Yield Criteria and Their Application to the Forming of Wire

Bibliographic Details
Main Author:	Carlsson, Bjorn
Format:	Article
Language:	English
Published:	De Gruyter 1998-06-01
Series:	Journal of the Mechanical Behavior of Materials
Online Access:	https://doi.org/10.1515/JMBM.1998.9.2.103

Similar Items

Anisotropy in yielding and fracture toughness in polymers as affected by forming and annealing
by: Brown, Robert J.
Published: (2008)

Magnetic Anisotropies of Patterned Ni planar wires by Magnetoresistance Measurement
by: Wang, Hui-Chieh, et al.
Published: (2011)

On yield surfaces with deformation induced anisotropy
by: Kuo-Lun Wu, et al.
Published: (2009)

OPTICAL ANISOTROPY IN InN/GaN DISK-IN-WIRE STRUCTURES
by: Merrill, Ky
Published: (2012)

Identification of 7B04 aluminum alloy anisotropy yield criteria with conventional test and Pottier test at elevated temperature
by: Zhihao Wang, et al.
Published: (2019-12-01)

Reliability Criteria for Thick Bonding Wire
by: Turker Dagdelen, et al.
Published: (2018-04-01)

Extended anisotropy yield criteria applied to Ti6Al4V at a high range of temperatures and considerations on asymmetric behavior
by: J. Ayllón, et al.
Published: (2021-10-01)

Characterisation of yield stress anisotropy and the Bauschinger effect in alloys and composites : an application of neutron diffraction
by: Sarkar, Jaydeep
Published: (1999)

Spatial detection of ferromagnetic wires using GMR sensor and based on shape induced anisotropy
by: B Rezaeealam
Published: (2013-12-01)

ESTIMATION AND UTILIZATION OF STRUCTURE ANISOTROPY IN FORMING PIECES
by: M. Martinkovic
Published: (2017-03-01)

The variation and visualisation of elastic anisotropy in rock-forming minerals
by: D. Healy, et al.
Published: (2020-03-01)

Determination of the Forming Limit for a ZIRLO™ Sheet with High Anisotropy
by: Minsoo Kim, et al.
Published: (2020-12-01)

Magnetization Reversal and Magnetic Anisotropy in Ordered CoNiP Nanowire Arrays: Effects of Wire Diameter
by: Luu Van Thiem, et al.
Published: (2015-03-01)

Comparison Between Hydraulic Conductivity Anisotropy and Electrical Resistivity Anisotropy From Tomography Inverse Modeling
by: Simon Gernez, et al.
Published: (2019-06-01)

Investigation of magnetic anisotropies in sub-micron planar Nickel wires using temperature-dependent magneto-transport
by: Wu, I-Chu, et al.
Published: (2016)

Wire Width Sizing for Delay and Yield Optimization
by: Jia-Xun Yang, et al.
Published: (2005)

Endochronic Model of Yield Surface and Material Function Accounting for Deformation Induced Anisotropy
by: Lin Hsi-Yen, et al.
Published: (2006)

Yield-Driven Wiring and Via Improvement with Timing Consideration
by: Bo-Yi Chiang, et al.
Published: (2007)

Redundant Via Insertion with Wire Shifting for Yield Improvement
by: Lee,Sheng-Hung, et al.
Published: (2010)

Ultrasonic Anisotropy in Composites: Effects and Applications
by: Bernhardt, Y., et al.
Published: (2022)

Comparison of Anisotropy Reduction Strategies for Transformation Optics Designs
by: M. A. F. C. Junqueira, et al.
Published: (2015-01-01)

Influence of fourfold anisotropy form on hysteresis loop shape in ferromagnetic nanostructures
by: Andrea Ehrmann, et al.
Published: (2014-08-01)

Application of modified yield criteria for calculation of safe pressures on the subgrade soil
by: A.L. Kalinin
Published: (2013-06-01)

Strong and robust polarization anisotropy of site- and size-controlled single InGaN/GaN quantum wires
by: Hwan-Seop Yeo, et al.
Published: (2020-09-01)

The in-plane magnetic anisotropy in manganite film: A novel magnetic anisotropy induced by structural anisotropy
by: Haiou Wang, et al.
Published: (2020-09-01)

Interacting functionally graded quantum wires/quantum dots with arbitrary shapes and general anisotropy within a distinct piezoelectric matrix
by: Shodja Hossein M., et al.
Published: (2014-05-01)

Measuring neutron yield and ρR anisotropies with activation foils at the National Ignition Facility
by: Bleuel D.L., et al.
Published: (2013-11-01)

Dieless Nail Draw Forming of Metal Wire
by: Chia-Wei Wang, et al.
Published: (2012)

Yield criteria for reinforced concrete slabs
by: Arnaouti, Christakis
Published: (1972)

Modélisation de l'anisotropie plastique et application à la mise en forme des tôles métalliques
by: Rabahallah, Meziane
Published: (2007)

A Study on Application of Fracture Criteria to Micro Forming of Titanium Sheet
by: Yi-Che Kuo, et al.
Published: (2013)

Ferromagnetic resonance of Ni wires fabricated on ferroelectric LiNbO3 substrate for studying magnetic anisotropy induced by the heterojunction
by: Akinobu Yamaguchi, et al.
Published: (2018-05-01)

Influences of Crystalline Anisotropy, Doping, Porosity, and Connectivity on the Critical Current Densities of Superconducting Magnesium Diboride Bulks, Wires, and Thin Films
by: Susner, Michael A.
Published: (2012)

Jump conditions for pressure anisotropy and comparison with the Earth's bow shock
by: D. F. Vogl, et al.
Published: (2001-01-01)

Comparison of Theories of Anisotropy in Transformer Oil-Based Magnetic Fluids
by: Jozef Kudelcik, et al.
Published: (2013-01-01)

Application of Artificial Neural Networks for Multi-Criteria Yield Prediction of Winter Rapeseed
by: Gniewko Niedbała
Published: (2019-01-01)

Fluorescence anisotropy studies and their application to biological membranes
by: Al-Alawi, S. M.
Published: (1987)

Application of Time-resolved Stokesmeter for Anisotropy Detection
by: Tsung-Lin Kuo, et al.
Published: (2010)

Applications of genetic algorithms to problems in seismic anisotropy
by: Horne, Stephen A.
Published: (1995)

Temperature anisotropies: covariant CMB anisotropies and nonlinear corrections
by: Gebbie, Tim
Published: (2019)