Possibilities of Monitoring the Technical Condition of the Combustion Engine with Starter Load Current

• Main Authors: Michal Jukl, Adam Polcar, Jiří Čupera
• Format: Article
• Language: English
• Published: Mendel University Press 2014-01-01
• Series: Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis
• Subjects: starter current; compression pressure; engine wear
• Online Access: https://acta.mendelu.cz/62/5/0961/
• ISSN: 1211-8516; 2464-8310

This article deals with the verification of relations between the electric current of engine starter and tightness of the combustion chamber and the possibility of its use for the evaluation of the state in terms of engine wear. Engine wear is closely related to the quality of fuel combustion and also with the amount of produced harmful emissions. On this basis, it would be possible to extend the technical requirements of the protocol OBD to include the indirect control of engine wear. To meet the objectives set out above measurement was carried out by a petrol engine, which was located in the vehicle Škoda Felicia Combi GLX 1.3 The whole measurement was divided into several parts. The first measurement was carried out on the abovementioned motor without simulating leakage. The second measurement was performed when the leakage of one cylinder was simulated. Simulated leakage was conducted at removing the spark plugs. Other measurements simulated “mild” leak of the whole engine – all cylinders. Leakage was implemented by loosing all the spark plugs about 8 turns against full tightening with the appropriate torque. The last, fourth measurement simulates a “large” leaks of engine cylinders. This leakage was induced by removing all the spark plugs from all cylinders. As the measurement results showed leakage of one cylinder, and also the whole engine is reflected not only in the individual amplitude of the starter current, but also the shape of the entire curve.