On Stability of Open-Loop Operation without Rotor Information for Brushless DC Motors
Open-loop operation mode is often used to control the Brushless DC Motors (BLDCMs) without rotor position sensors when the back electromotive force (EMF) is too weak due to the very low rotor velocity. The rotor position information is not necessary in this mode and the stator windings are supplied...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Hindawi Limited
2014-01-01
|
| Series: | Mathematical Problems in Engineering |
| Online Access: | http://dx.doi.org/10.1155/2014/740498 |
| Summary: | Open-loop operation mode is often used to control the Brushless DC Motors (BLDCMs) without rotor position sensors when the back electromotive force (EMF) is too weak due to the very low rotor velocity. The rotor position information is not necessary in this mode and the stator windings are supplied with voltages under a certain ratio of the amplitude to the frequency. However, the rotor synchronization will be destroyed once if the commutation instant is inappropriate. In order to improve the reliability of the open-loop operation mode, a dynamic equation is established to represent the synchronization error between the rotor and the stator. Thereafter, the stability of the open-loop control mode is analyzed by using Lyapunov indirect method. Theoretical analysis indicates that the open-loop control mode is asymptotically stable only when the commutation instant of the stator current lags behind the ideal one suitably. Finally, theoretical analysis is verified through the experimental results of a certain BLDCM. |
|---|---|
| ISSN: | 1024-123X 1563-5147 |