Reverse correction parameters during helical reduction

• Main Authors: V. V. Klubovich, V. V. Liaukovich, V. A. Tamila
• Format: Article
• Language: English
• Published: Belarusian National Technical University 2020-04-01
• Series: Litʹë i Metallurgiâ
• Subjects: helical reduction; reverse correction; feed angle; reduced workpiece length
• Online Access: https://lim.bntu.by/jour/article/view/3186
• ISSN: 1683-6065; 2414-0406

The technology of helical reduction with reverse correction is presented. The key difference of the technology is the change in the feed angle during the reduction process to the region of negative values, which allows reverse correction (reduction in the region of small feed angles) and remove the workpiece from the roll gap. This technology can be used to obtain axisymmetric billets of variable profile. The main parameters that determine the reverse correction process are the rotation speed of the rolls, the rate of change of the feed angle, as well as the dimensions of the rolls and the workpiece. When the feed angle changes (in particular during correction), the workpiece continues to move in the axial direction, which makes it necessary to evaluate the magnitude of this movement. In this work, an accurate calculation of the length of the reduced part of the workpiece with a change in the feed angle is carried out.