Optimizing the design of compression helical springs
The helical compression spring is calculated in the STAS 7067 standard based on the wire twist tension and considering the type of deformation, fatigue loading, and vibration and buckling effect. To avoid recalculation of the values of already calculated parameters, the proposed calculation the...
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Naval Academy Press
2018-06-01
|
| Series: | Scientific Bulletin of Naval Academy |
| Online Access: | https://www.anmb.ro/buletinstiintific/buletine/2018_Issue1/01_MES/121.pdf |
| Summary: | The helical compression spring is calculated in the STAS 7067 standard based on the
wire twist tension and considering the type of deformation, fatigue loading, and vibration and
buckling effect.
To avoid recalculation of the values of already calculated parameters, the proposed calculation
the method uses the same formulas from STAS but sets out a set of restrictions that must be observed
in the design stages.
To optimize design, start with material selection, set minimum and maximum forces, also the
type of deformation as well as the admissible dimensions. |
|---|---|
| ISSN: | 2392-8956 1454-864X |