Evaluation of data‐driven performance measures for comparing and ranking traffic bottlenecks
Abstract Traffic analysis procedures are becoming more robust over time. However, there is still significant room for improvement both in practitioners’ adoption of robust methods and in robustness of the methods themselves. One example of oversimplified practice involves peak hour or 30th highest h...
Main Authors: | , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Wiley
2021-04-01
|
Series: | IET Intelligent Transport Systems |
Online Access: | https://doi.org/10.1049/itr2.12040 |
id |
doaj-28b1f5b0938a4bd48a3a76f3b8aaac74 |
---|---|
record_format |
Article |
spelling |
doaj-28b1f5b0938a4bd48a3a76f3b8aaac742021-07-14T13:20:53ZengWileyIET Intelligent Transport Systems1751-956X1751-95782021-04-0115450451310.1049/itr2.12040Evaluation of data‐driven performance measures for comparing and ranking traffic bottlenecksDavid Hale0Georgios Chrysikopoulos1Alexandra Kondyli2Amir Ghiasi3Leidos Inc. Reston Virginia USACivil, Environmental, and Architectural Engineering University of Kansas Lawrence Kansas USACivil, Environmental, and Architectural Engineering University of Kansas Lawrence Kansas USALeidos Inc. Reston Virginia USAAbstract Traffic analysis procedures are becoming more robust over time. However, there is still significant room for improvement both in practitioners’ adoption of robust methods and in robustness of the methods themselves. One example of oversimplified practice involves peak hour or 30th highest hour analysis, which fails to capture the impacts of varying demands and operating conditions. To address this limitation, detailed reliability modelling procedures were developed for the Highway Capacity Manual (HCM), but these procedures bring challenging input data and calibration requirements. A new generation of data‐driven tools is capable of real‐time congestion identification, but their performance measures are only beginning to improve and evolve. Finally, comparing and ranking congested locations (i.e. bottlenecks) on the basis of experience and judgment lacks credibility unless backed by quantitative results. This study discusses the development of new and innovative performance measures for congestion measurement. A case study of ranking eight real‐world bottlenecks based on the proposed measures and existing HCM measures produced new insights that could improve both approaches. Ideally, these new insights and methods would be accepted by agencies and/or commercial products for a new level of robustness in congestion measurement.https://doi.org/10.1049/itr2.12040 |
collection |
DOAJ |
language |
English |
format |
Article |
sources |
DOAJ |
author |
David Hale Georgios Chrysikopoulos Alexandra Kondyli Amir Ghiasi |
spellingShingle |
David Hale Georgios Chrysikopoulos Alexandra Kondyli Amir Ghiasi Evaluation of data‐driven performance measures for comparing and ranking traffic bottlenecks IET Intelligent Transport Systems |
author_facet |
David Hale Georgios Chrysikopoulos Alexandra Kondyli Amir Ghiasi |
author_sort |
David Hale |
title |
Evaluation of data‐driven performance measures for comparing and ranking traffic bottlenecks |
title_short |
Evaluation of data‐driven performance measures for comparing and ranking traffic bottlenecks |
title_full |
Evaluation of data‐driven performance measures for comparing and ranking traffic bottlenecks |
title_fullStr |
Evaluation of data‐driven performance measures for comparing and ranking traffic bottlenecks |
title_full_unstemmed |
Evaluation of data‐driven performance measures for comparing and ranking traffic bottlenecks |
title_sort |
evaluation of data‐driven performance measures for comparing and ranking traffic bottlenecks |
publisher |
Wiley |
series |
IET Intelligent Transport Systems |
issn |
1751-956X 1751-9578 |
publishDate |
2021-04-01 |
description |
Abstract Traffic analysis procedures are becoming more robust over time. However, there is still significant room for improvement both in practitioners’ adoption of robust methods and in robustness of the methods themselves. One example of oversimplified practice involves peak hour or 30th highest hour analysis, which fails to capture the impacts of varying demands and operating conditions. To address this limitation, detailed reliability modelling procedures were developed for the Highway Capacity Manual (HCM), but these procedures bring challenging input data and calibration requirements. A new generation of data‐driven tools is capable of real‐time congestion identification, but their performance measures are only beginning to improve and evolve. Finally, comparing and ranking congested locations (i.e. bottlenecks) on the basis of experience and judgment lacks credibility unless backed by quantitative results. This study discusses the development of new and innovative performance measures for congestion measurement. A case study of ranking eight real‐world bottlenecks based on the proposed measures and existing HCM measures produced new insights that could improve both approaches. Ideally, these new insights and methods would be accepted by agencies and/or commercial products for a new level of robustness in congestion measurement. |
url |
https://doi.org/10.1049/itr2.12040 |
work_keys_str_mv |
AT davidhale evaluationofdatadrivenperformancemeasuresforcomparingandrankingtrafficbottlenecks AT georgioschrysikopoulos evaluationofdatadrivenperformancemeasuresforcomparingandrankingtrafficbottlenecks AT alexandrakondyli evaluationofdatadrivenperformancemeasuresforcomparingandrankingtrafficbottlenecks AT amirghiasi evaluationofdatadrivenperformancemeasuresforcomparingandrankingtrafficbottlenecks |
_version_ |
1721302777908428800 |