Adaptive Automatic Gauge Control of a Cold Strip Rolling Process
The paper tackles with thickness control structure of the cold rolled strips. This structure is based on the rolls position control of a reversible quarto rolling mill. The main feature of the system proposed in the paper consists in the compensation of the errors introduced by the deficient dynamic...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Stefan cel Mare University of Suceava
2010-02-01
|
| Series: | Advances in Electrical and Computer Engineering |
| Subjects: | |
| Online Access: | http://dx.doi.org/10.4316/AECE.2010.01002 |
| Summary: | The paper tackles with thickness control structure of the cold rolled strips. This structure is based on the rolls position control of a reversible quarto rolling mill. The main feature of the system proposed in the paper consists in the compensation of the errors introduced by the deficient dynamics of the hydraulic servo-system used for the rolls positioning, by means of a dynamic compensator that approximates the inverse system of the servo-system. Because the servo-system is considered variant over time, an on-line identification of the servo-system and parameter adapting of the compensator are achieved. The results obtained by numerical simulation are presented together with the data taken from real process. These results illustrate the efficiency of the proposed solutions. |
|---|---|
| ISSN: | 1582-7445 1844-7600 |