Characterization of Particle and Gaseous Emissions from Marine Diesel Engines with Different Fuels and Impact of After-Treatment Technology

The International Maritime Organization (IMO) Marine Environment Protection Committee (MEPC) and some countries have gradually strengthened the laws regulating ship exhaust emissions. The aim of this paper is to estimate the impact of an after-treatment technology exhaust gas cleaning (EGC) system o...

Full description

Bibliographic Details
Main Authors: Jinxi Zhou, Song Zhou, Yuanqing Zhu
Format: Article
Language:English
Published: MDPI AG 2017-07-01
Series:Energies
Subjects:
SO2
PM
EGC
Online Access:https://www.mdpi.com/1996-1073/10/8/1110
id doaj-28621cbfe15f4520bedbd0a86d78c990
record_format Article
spelling doaj-28621cbfe15f4520bedbd0a86d78c9902020-11-25T00:09:35ZengMDPI AGEnergies1996-10732017-07-01108111010.3390/en10081110en10081110Characterization of Particle and Gaseous Emissions from Marine Diesel Engines with Different Fuels and Impact of After-Treatment TechnologyJinxi Zhou0Song Zhou1Yuanqing Zhu2College of Power and Energy Engineering, Harbin Engineering University, Harbin 150001, ChinaCollege of Power and Energy Engineering, Harbin Engineering University, Harbin 150001, ChinaCollege of Power and Energy Engineering, Harbin Engineering University, Harbin 150001, ChinaThe International Maritime Organization (IMO) Marine Environment Protection Committee (MEPC) and some countries have gradually strengthened the laws regulating ship exhaust emissions. The aim of this paper is to estimate the impact of an after-treatment technology exhaust gas cleaning (EGC) system on marine diesel engine emissions and the cost advantage compared to using low-sulfur fuel oil. The emission characteristics of SO2 and particulate matter (PM) produced from high sulfur oil and low sulfur oil in a low-speed two-stroke marine diesel engine were also presented. The removal efficiency of SO2 has been tested and the PM removal efficiency was also predicted in this study. When using high sulfur oil, the emission factor of SO2 and PM were from 8.73 g/kWh to 11.6 g/kWh and 2.0 g/kWh to 2.7 g/kWh, respectively. These values are significantly higher than the emission values from using low sulfur oil. The fuel sulfur content (FSC) was the key factor affecting the emission factors of SO2 and PM. The fuel change could reduce the mass emission factor of PM, which is above 90% for the total particle emission with the two fuels. When using the EGC system, the desulfurization efficiencies were above 99%. The pH values at a 25, 39, 53, and 67% load were also stabilized to be around 7.5, 7.6, 7.7, and 8, respectively. The EGC system can also capture part of the primary PM and secondary PM formed from SO2. The EGC system was more effective for PM of the size larger than 1 μm. Thus, according to this study, the usage of low sulfur oil and EGC will also substantially decrease the emission of currently unregulated hazardous chemical species in the exhaust gas of ships in addition to satisfying future emissions regulations of ship. Furthermore, the EGC system also had a significant cost advantage compared to using low-sulfur fuel oil.https://www.mdpi.com/1996-1073/10/8/1110marine diesel engineSO2PMEGClow sulfur oil
collection DOAJ
language English
format Article
sources DOAJ
author Jinxi Zhou
Song Zhou
Yuanqing Zhu
spellingShingle Jinxi Zhou
Song Zhou
Yuanqing Zhu
Characterization of Particle and Gaseous Emissions from Marine Diesel Engines with Different Fuels and Impact of After-Treatment Technology
Energies
marine diesel engine
SO2
PM
EGC
low sulfur oil
author_facet Jinxi Zhou
Song Zhou
Yuanqing Zhu
author_sort Jinxi Zhou
title Characterization of Particle and Gaseous Emissions from Marine Diesel Engines with Different Fuels and Impact of After-Treatment Technology
title_short Characterization of Particle and Gaseous Emissions from Marine Diesel Engines with Different Fuels and Impact of After-Treatment Technology
title_full Characterization of Particle and Gaseous Emissions from Marine Diesel Engines with Different Fuels and Impact of After-Treatment Technology
title_fullStr Characterization of Particle and Gaseous Emissions from Marine Diesel Engines with Different Fuels and Impact of After-Treatment Technology
title_full_unstemmed Characterization of Particle and Gaseous Emissions from Marine Diesel Engines with Different Fuels and Impact of After-Treatment Technology
title_sort characterization of particle and gaseous emissions from marine diesel engines with different fuels and impact of after-treatment technology
publisher MDPI AG
series Energies
issn 1996-1073
publishDate 2017-07-01
description The International Maritime Organization (IMO) Marine Environment Protection Committee (MEPC) and some countries have gradually strengthened the laws regulating ship exhaust emissions. The aim of this paper is to estimate the impact of an after-treatment technology exhaust gas cleaning (EGC) system on marine diesel engine emissions and the cost advantage compared to using low-sulfur fuel oil. The emission characteristics of SO2 and particulate matter (PM) produced from high sulfur oil and low sulfur oil in a low-speed two-stroke marine diesel engine were also presented. The removal efficiency of SO2 has been tested and the PM removal efficiency was also predicted in this study. When using high sulfur oil, the emission factor of SO2 and PM were from 8.73 g/kWh to 11.6 g/kWh and 2.0 g/kWh to 2.7 g/kWh, respectively. These values are significantly higher than the emission values from using low sulfur oil. The fuel sulfur content (FSC) was the key factor affecting the emission factors of SO2 and PM. The fuel change could reduce the mass emission factor of PM, which is above 90% for the total particle emission with the two fuels. When using the EGC system, the desulfurization efficiencies were above 99%. The pH values at a 25, 39, 53, and 67% load were also stabilized to be around 7.5, 7.6, 7.7, and 8, respectively. The EGC system can also capture part of the primary PM and secondary PM formed from SO2. The EGC system was more effective for PM of the size larger than 1 μm. Thus, according to this study, the usage of low sulfur oil and EGC will also substantially decrease the emission of currently unregulated hazardous chemical species in the exhaust gas of ships in addition to satisfying future emissions regulations of ship. Furthermore, the EGC system also had a significant cost advantage compared to using low-sulfur fuel oil.
topic marine diesel engine
SO2
PM
EGC
low sulfur oil
url https://www.mdpi.com/1996-1073/10/8/1110
work_keys_str_mv AT jinxizhou characterizationofparticleandgaseousemissionsfrommarinedieselengineswithdifferentfuelsandimpactofaftertreatmenttechnology
AT songzhou characterizationofparticleandgaseousemissionsfrommarinedieselengineswithdifferentfuelsandimpactofaftertreatmenttechnology
AT yuanqingzhu characterizationofparticleandgaseousemissionsfrommarinedieselengineswithdifferentfuelsandimpactofaftertreatmenttechnology
_version_ 1725411082258874368