Determination of dynamic properties of the caterpillar drive of hydraulic reclamation machines and the method of articulated attachment of the working body of the trenchless pipelayer

• Main Authors: T. G. Gasanov, E. Z. Batmanov, M. R. Guseynov, M. N. Nazhmudinova
• Format: Article
• Language: Russian
• Published: Daghestan State Technical University 2021-01-01
• Series: Vestnik Dagestanskogo Gosudarstvennogo Tehničeskogo Universiteta: Tehničeskie Nauki
• Subjects: unevenness; vibrations; equations; caterpillar; working body; sample; speed; hinge; pipelayer; design scheme
• Online Access: https://vestnik.dgtu.ru/jour/article/view/883
• ISSN: 2073-6185; 2542-095X

Objective. The objective of the study is to determine the requirements for various devices of hydraulic reclamation machines, which are widely used in the construction of canals and drains, to maintain a given slope, as well as the calculation of the executive mechanism that serves to eliminate the oscillating movement of the working body relative to the line of the specified slope.Methods. A mathematical description of the vibrations of the working body for caterpillar hydraulic reclamation machines with mounted working bodies is given.Results. The article presents the results of research to identify the main factors affecting the oscillations of the working body of caterpillar reclamation machines. As a result of theoretical and experimental studies, it was found that when a caterpillar machine with a rigid undercarriage crosses single and multiple irregularities, the movement of the cutting edge of the rigidly mounted working body is graphically depicted by sinusoidal curves. The obtained dependencies allow conducting calculations of the automatic system of maintaining the specified slope and establish the area of stable modes of system operation. A geometric method for optimizing the hinge linkage of the working body of trenchless pipelayer is presented.Conclusion. The proposed methods of improving the performance of caterpillar hydraulic reclamation machines with mounted working bodies when moving on uneven ground surfaces can be used to create a wide class of mounted earthmoving machines, both with passive and active working bodies.