Grid-Based Set Point Generation Strategy for Position Control of Dynamic Positioning Assisted Mooring System

• Main Authors: Sol-Mi Choi, Jaeyong Lee, Seung Jae Lee, Daesoo Lee, Kwang-Hyo Jung
• Format: Article
• Language: English
• Published: The Korean Society of Ocean Engineers 2019-04-01
• Series: 한국해양공학회지
• Subjects: DP assisted mooring system; Tension reduction control; Grid; Set point; Fuel consumption reduction
• Online Access: http://joet.org/upload/pdf/joet-33-2-99.pdf
• ISSN: 1225-0767; 2287-6715

Unlike typical a dynamic positioning (DP) system, a DP-assisted mooring system must determine a set point (SP) that can ensure a mooring tension safety range to prevent an excessive increase in mooring tension. In this paper, a new algorithm for determining the SP is suggested in order to reduce the tension on all the mooring lines. To determine the SP, a working area around the vessel is represented by a rectangular grid. Thus, the size of the grid area is limited considering the offset of a vessel with a mooring system. At each grid’s nodes, the resultant tension from all the mooring lines is estimated using the time history of the tension and vessel’s position. The results of static analyses for each grid position are used to estimate the global tension. Consequently, the SP is automatically selected as a position satisfying criterion for minimizing the total tension. In order to validate the suggested algorithm, a motion simulation with the control system in the time domain and a discussion of the results are presented.