Characterizing short-fiber-reinforced composites produced using additive manufacturing

• Main Authors: Marcus Ivey, Garrett W. Melenka, Jason. P. Carey, Cagri Ayranci
• Format: Article
• Language: English
• Published: Taylor & Francis Group 2017-07-01
• Series: Advanced Manufacturing: Polymer & Composites Science
• Subjects: Material extrusion additive manufacturing; Annealing; Mechanical testing; Differential scanning calorimetry (DSC); Short-fiber composite; Optical extensometry
• Online Access: http://dx.doi.org/10.1080/20550340.2017.1341125
• ISSN: 2055-0340; 2055-0359

Material extrusion additive manufacturing (MEAM), a sub-branch of three-dimensional (3D) printing is growing in popularity. Test specimens were 3D-printed using commercial polylactic acid (PLA) filament, and PLA filament reinforced with short-carbon fibers (PLA/CF). As-printed specimens and specimens that were annealed at three different temperatures, then subjected to tensile testing. The internal microstructures of the samples were also examined. The effects of the short-carbon fiber fillers on the mechanical properties of 3D-printed PLA were investigated, and the effects of the annealing process on polymer crystallinity and mechanical properties. The annealing process was shown to increase the crystallinity of both sample groups, though no statistically significant effect of annealing on mechanical properties was observed. The tensile properties of the PLA and PLA/CF filaments showed that the addition of carbon fibers to the PLA filament led to a significant increase in elastic modulus of the MEAM samples.