Available transmission capacity assessment
Effective power system operation requires the analysis of vast amounts of information. Power market activities expose power transmission networks to high-level power transactions that threaten normal, secure operation of the power system. When there are service requests for a specific sink/...
Main Authors: | , |
---|---|
Format: | Article |
Language: | English |
Published: |
Faculty of Technical Sciences in Cacak
2012-01-01
|
Series: | Serbian Journal of Electrical Engineering |
Subjects: | |
Online Access: | http://www.doiserbia.nb.rs/img/doi/1451-4869/2012/1451-48691202201S.pdf |
Summary: | Effective power system operation requires the analysis of vast amounts of
information. Power market activities expose power transmission networks to
high-level power transactions that threaten normal, secure operation of the
power system. When there are service requests for a specific sink/source
pair in a transmission system, the transmission system operator (TSO) must
allocate the available transfer capacity (ATC). It is common that ATC has a
single numerical value. Additionally, the ATC must be calculated for the
base case configuration of the system, while generation dispatch and
topology remain unchanged during the calculation. Posting ATC on the
internet should benefit prospective users by aiding them in formulating
their requests. However, a single numerical value of ATC offers little for
prospect for analysis, planning, what-if combinations, etc. A symbolic
approach to the power flow problem (DC power flow and ATC) offers a
numerical computation at the very end, whilst the calculation beforehand is
performed by using symbols for the general topology of the electrical
network. Qualitative analysis of the ATC using only qualitative values, such
as increase, decrease or no change, offers some new insights into ATC
evaluation, multiple transactions evaluation, value of counter-flows and
their impact etc. Symbolic analysis in this paper is performed after the
execution of the linear, symbolic DC power flow. As control variables, the
mathematical model comprises linear security constraints, ATC, PTDFs and
transactions. The aim is to perform an ATC sensitivity study on a five
nodes/seven lines transmission network, used for zonal market activities
tests. A relatively complicated environment with twenty possible bilateral
transactions is observed. |
---|---|
ISSN: | 1451-4869 2217-7183 |