Neutron Bragg-edge transmission imaging for microstructure and residual strain in induction hardened gears

• Main Authors: Yuhua Su, Kenichi Oikawa, Takenao Shinohara, Tetsuya Kai, Takashi Horino, Osamu Idohara, Yoshitaka Misaka, Yo Tomota
• Format: Article
• Language: English
• Published: Nature Publishing Group 2021-02-01
• Series: Scientific Reports
• Online Access: https://doi.org/10.1038/s41598-021-83555-9

Abstract A time-of-flight Bragg-edge neutron transmission imaging was used to investigate the microstructure and strain distributions in a gear hardened by a newly developed two-step induction-heating method: precursor (Sample 1) and final product (Sample 2). The edge-position and edge-broadening were determined and mapped with high spatial resolution, which enabled us to confirm the two-dimensional distributions of the microstructure and residual strain. A deep hardened layer was made for Sample 1 in which martensite was formed on the entire teeth and the outer peripheral portion of the gear body. Sample 2 was subjected to double induction-hardening, where a tempered martensite was formed as the thermal refined microstructure between a fine-grained martensite at the tooth surface and a ferrite-pearlite microstructure at the core. The relationship between edge-broadening and the Vickers hardness described by a linear equation was employed to derive the elastic residual strain. The residual strain map for Sample 2 revealed that a steep compressive strain was introduced into the fine-grained martensite at the tooth surface by the super rapid induction-heating and quenching process. The reversal of tension was speculated to occur below 2 mm from the tooth tip, and the strain was almost zero in the core region.