Summary: | Among heavy metals silver ions (Ag<sup>+</sup>) severely impact water, the environment and have serious side effects on human health. This article proposes a facile and ultrasensitive fluorescent probe for the detection of Ag<sup>+</sup> ions using SYBR Green I (SGI) and cytosine-rich (C-rich) silver-specific oligonucleotide (SSO). Maximum fluorescent intensities with the highest sensitivity were obtained using a 0.61 dye/SSO base ratio (DBR). The established sensing principle using the optimized parameters for bath temperature, SSO concentration, DBR, ionic strength, pH, reaction time, incubation duration and temperature effect achieved a sensitive limit of detection of 59.9 nM for silver ions (calculated through 3σ, n = 11) with a linear working range of 100–1000 nM and 0.997 R<sup>2</sup>. The total time for one assay is below 10 min; The relative standard derivation for ten repeated measurements is 8.6%. No blatant interferences were observed in the selectivity test when fluorescent probe is evaluated by investigating the effects of 11 common interference factors in the aqueous matrix. In extreme cases, three false-negative factors were observed, including calcium hardness, magnesium hardness, and hypochlorite. The recovery ratios were within the range of 79~110% for three types of diluted water.
|