Propriedades físicas de chapas de partículas aglomeradas fabricadas com resíduos de processamento mecânico da madeira de Pinus elliotii Engelm
The objective of this research was the investigation of dimensional stability of particleboard made with slash pine wood residues. The boards were manufactured with chips and shaves, resulting from sawmill and planermill industries, respectively, used pure or mixed. The adhesive used was urea-form...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | Portuguese |
| Published: |
Universidade Federal de Santa Maria
2005-01-01
|
| Series: | Ciência Florestal |
| Online Access: | http://www.redalyc.org/articulo.oa?id=53415409 |
| Summary: | The objective of this research was the investigation of dimensional stability of particleboard made
with slash pine wood residues. The boards were manufactured with chips and shaves, resulting from sawmill
and planermill industries, respectively, used pure or mixed. The adhesive used was urea-formaldehyde in
proportions of 4, 8 and 12%, based on the ovendry weight of the particles. Board density investigated were
0.6 and 0.7 g/cm3. The properties evaluated were water absorption and thickness swelling. The best boards
were those made of shaves glued with 8 and 12% adhesive content. |
|---|---|
| ISSN: | 0103-9954 1980-5098 |