Evaluation of the Possibility of Applying Spatial 3D Imaging Using X-Ray Computed Tomography Reconstruction Methods for Quantitative Analysis of Multiphase Materials / Rentgenowska Analiza Ilościowa Materiałów Wielofazowych Z Wykorzystaniem Przestrzennego Obrazowania (3D) Przy Użyciu Metod Rekonstrukcji Tomografii Komputerowej

• Main Authors: Matysik P., Chojnacki M., Jóźwiak S., Czujko T., Lipiński S.
• Format: Article
• Language: English
• Published: Polish Academy of Sciences 2015-12-01
• Series: Archives of Metallurgy and Materials
• Subjects: computed tomography; electron microscopy; X-ray diffraction; stereology; phase analysis; quantitative research
• Online Access: http://www.degruyter.com/view/j/amm.2015.60.issue-4/amm-2015-0430/amm-2015-0430.xml?format=INT
• ISSN: 2300-1909

In this paper the possibility of using X-ray computed tomography (CT) in quantitative metallographic studies of homogeneous and composite materials is presented. Samples of spheroidal cast iron, Fe-Ti powder mixture compact and epoxy composite reinforced with glass fibers, were subjected to comparative structural tests. Volume fractions of each of the phase structure components were determined by conventional methods with the use of a scanning electron microscopy (SEM) and X-ray diffraction (XRD) quantitative analysis methods. These results were compared with those obtained by the method of spatial analysis of the reconstructed CT image. Based on the comparative analysis, taking into account the selectivity of data verification methods and the accuracy of the obtained results, the authors conclude that the method of computed tomography is suitable for quantitative analysis of several types of structural materials.