Utilization of En Ac-42100 Cast Aluminum Alloy for Casting of Critical Components. I. Preparation and Mechanical Properties
Requirement on the minimum value of elongation for critical components is about 15 %. The research deals with the possibility of replacing the dendritic morphology of primary solid solution and brittle eutectic silicon plates with finer particles with a more suitable morphology and size, and the pos...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Sciendo
2014-12-01
|
| Series: | Scientific Proceedings. Faculty of Mechanical Engineering |
| Subjects: | |
| Online Access: | https://doi.org/10.2478/stu-2014-0017 |
| Summary: | Requirement on the minimum value of elongation for critical components is about 15 %. The research deals with the possibility of replacing the dendritic morphology of primary solid solution and brittle eutectic silicon plates with finer particles with a more suitable morphology and size, and the possibility of increasing the mechanical properties. Introduced first part is focused on the process of preparation of experimental material and mechanical properties. |
|---|---|
| ISSN: | 1338-5011 |