Procedure of computation and automatic marking of drill hole spacing at excavation of horizontal workings
Contemporary approaches and techniques impacting subsurface penetration performance and penetration rate are studied and analyzed. Two main dimensions are identified, and the works performed during operation were compared. A solution based on implementation of modular architecture of the system with...
Main Authors: | Kononenko Maxim, Ganiev Ruslan, Kuzminykh Roman |
---|---|
Format: | Article |
Language: | English |
Published: |
EDP Sciences
2020-01-01
|
Series: | E3S Web of Conferences |
Online Access: | https://www.e3s-conferences.org/articles/e3sconf/pdf/2020/37/e3sconf_umd2020_01011.pdf |
Similar Items
-
Simulation of the preparation and face drilling processes with laser scanning and automated marking of the drilling grid
by: Volkova Evgeniya, et al.
Published: (2020-01-01) -
Water flushing of rock chips from horizontal holes drilled by rotary percussion.
by: Kilfoil, Arthur Mark
Published: (2018) -
Automatic drilling of holes for wing- and fin interface : A theoretic idea of how the drilling could be automated
by: Will, Maja, et al.
Published: (2017) -
The study of drilling mechanics of deep hole drill
by: Chen, Huang-Jin, et al. -
Some methodological drilling: Blasting parameters in the excavation of tunnel
by: Dambov Risto, et al.
Published: (2017-01-01)