Microstructural, microscratch and nanohardness mechanical characterization of secondary commercial HPDC AlSi9Cu3-type alloy

Microstructural, microscratch and nanohardness mechanical characterization of secondary commercial HPDC AlSi9Cu3-type alloy

A key issue in producing high quality aluminum automotive components using High-Pressure Die Casting (HPDC) process is minimizing the amount of imperfections. In the present research work, by means of optical microscopy (OM), SEM, TEM and AFM characterization techniques, microstructural evolution of...

Full description

Bibliographic Details
Main Authors:	Antonio Enrique Salas Reyes, Gerardo Altamirano Guerrero, Gabriel Rodríguez Ortiz, José Reyes Gasga, Jaime Francisco García Robledo, Octavio Lozada Flores, Patricia Sheilla Costa
Format:	Article
Language:	English
Published:	Elsevier 2020-07-01
Series:	Journal of Materials Research and Technology
Subjects:	AlSi9Cu3-type alloy High-Pressure die casting (Cu-Fe-Si-Mg) high contents Intermetallic compounds Microstructural characterization Micro and nanomechanical testing
Online Access:	http://www.sciencedirect.com/science/article/pii/S2238785420313673

Similar Items

Effect of the Addition of Rare Earth Element La on the Tribological Behaviour of AlSi5Cu1Mg Alloy
by: Wei Liu, et al.
Published: (2018-01-01)

Effect of Heat Treatments on the Microstructure, Hardness and Corrosion Behavior of Nondendritic AlSi9Cu3(Fe) Cast Alloy
by: Nacer ZAZI
Published: (2013-09-01)

Influence of Copper Addition in AlSi7MgCu Alloy on Microstructure Development and Tensile Strength Improvement
by: Davor Stanić, et al.
Published: (2020-12-01)

Gating system optimization of high pressure die casting thin-wall AlSi10MnMg longitudinal loadbearing beam based on numerical simulation
by: Xu Zhao, et al.
Published: (2018-11-01)

Effect of (Pr+Ce) Additions on Microstructure and Mechanical Properties of AlSi5Cu1Mg Alloy
by: Miao-Miao Fang, et al.
Published: (2019-05-01)

Predicting the Fatigue Life of an AlSi9Cu3 Porous Alloy Using a Vector-Segmentation Technique for a Geometric Parameterisation of the Macro Pores
by: Dejan Tomažinčič, et al.
Published: (2021-12-01)

Crack initiation and early propagation behavior of AlSi10Mg(Cu) cast alloy under thermal fatigue
by: ZHOU Hang, et al.
Published: (2019-03-01)

Effect of grain refinement and modification of eutectic phase on shrinkage of AlSi9Cu3 alloy
by: M. Petrič, et al.
Published: (2011-04-01)

Influence of Sludge Particles on the Fatigue Behavior of Al-Si-Cu Secondary Aluminium Casting Alloys
by: Lorella Ceschini, et al.
Published: (2018-04-01)

AlSi12 Alaşımından Üretilen Kompresör Silindir Kapağında Abrasif Aşınma Davranışının İncelenmesi
by: Samet Aksoy, et al.
Published: (2017-10-01)

AlSi12 Alaşımından Üretilen Kompresör Silindir Kapağında Abrasif Aşınma Davranışının İncelenmesi
by: Samet Aksoy, et al.
Published: (2017-01-01)

The Influence of Returnable Material on Internal Homogeneity of the High-Pressure Die-Cast AlSi9Cu3(Fe) Alloy
by: Marek Matejka, et al.
Published: (2021-07-01)

Investigation of the Quench Sensitivity of an AlSi10Mg Alloy in Permanent Mold and High-Pressure Vacuum Die Castings
by: Mengyun Liu, et al.
Published: (2019-06-01)

The Use of Selective Laser Melting to Increase the Performance of AlSi9Cu3Fe Alloy
by: Michaela Fousova, et al.
Published: (2018-10-01)

Microstructure and Properties of AlSi10Mg Powder for Selective Laser Melting
by: TANG Pengjun, et al.
Published: (2018-02-01)

The Influence of Cooling Rate on Microstructure and Mechanical Properties of AlSi9Cu3
by: Matic Žbontar, et al.
Published: (2021-01-01)

The Influence of the Content of Furfuryl Alcohol Monomer on the Process of Moulding Sand's Thermal Destruction
by: Dobosz St. M., et al.
Published: (2014-10-01)

Relationship between Microstructure Evolution and Tensile Properties of AlSi10Mg Alloys with Varying Mg Content and Solidification Cooling Rates
by: Maressa Gandolfi, et al.
Published: (2021-06-01)

Investigation on the Microstructure and Mechanical Properties of CNTs-AlSi10Mg Composites Fabricated by Selective Laser Melting
by: Shixuan Luo, et al.
Published: (2021-02-01)

Utilisation of mould temperature change in eliminating the Al5FeSi phases in secondary AlSi7Mg0.3 alloy
by: Bolibruchová D., et al.
Published: (2017-03-01)

Additive manufactured versus cast AlSi10Mg alloy: Microstructure and micromechanics
by: S.I. Shakil, et al.
Published: (2021-06-01)

Selective laser melting of high-strength primary AlSi9Cu3 alloy: Processability, microstructure, and mechanical properties
by: J. Fiocchi, et al.
Published: (2020-06-01)

Legeringsintervallets påverkan på dem mekaniska egenskaperna på aluminiumlegeringen EN AB-46000
by: Henriksson, Felix, et al.
Published: (2015)

Precipitation Kinetics and Evaluation of the Interfacial Mobility of Precipitates in an AlSi7Cu3.5Mg0.15 Cast Alloy with Zr and V Additions
by: Pierre Heugue, et al.
Published: (2019-07-01)

Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg
by: Wolfgang Schneller, et al.
Published: (2019-02-01)

Fracture–Mechanical Assessment of the Effect of Defects on the Fatigue Lifetime and Limit in Cast and Additively Manufactured Aluminum–Silicon Alloys from HCF to VHCF Regime
by: Jochen Tenkamp, et al.
Published: (2020-07-01)

Microstructural Characterization of the Anisotropy and Cyclic Deformation Behavior of Selective Laser Melted AlSi10Mg Structures
by: Mustafa Awd, et al.
Published: (2018-10-01)

Influence of the tempering on the evolution of the mechanical characteristics and microstructure of the foundry alloy AlSi7Zn3Cu2Mg
by: Ahmed HAKEM
Published: (2018-10-01)

Study of the Surface and Dimensional Quality of the AlSi10Mg Thin-Wall Components Manufactured by Selective Laser Melting
by: Muhammad Waqas, et al.
Published: (2021-05-01)

Cavitation Erosion Research for AlSi12 Alloy Tested at Different Time Periods
by: Daniel Chirus, et al.
Published: (2013-05-01)

Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS
by: Annalisa Pola, et al.
Published: (2019-06-01)

Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS
by: Annalisa Pola, et al.
Published: (2019-07-01)

Influence of Age Hardening Parameters on the Microstructure and Properties of the AlSi7Mg Sand Cast Alloy / Wpływ Parametrów Utwardzania Wydzieleniowego Na Strukturę I W Łaściwości Stopu Alsi7mg
by: Poloczek Ł., et al.
Published: (2015-12-01)

Process Window for Highly Efficient Laser-Based Powder Bed Fusion of AlSi10Mg with Reduced Pore Formation
by: Artur Leis, et al.
Published: (2021-09-01)

Influence of ripening on the evolution of mechanical and structural properties of the AlSi12Cu1Mg alloy
by: Ahmed HAKEM
Published: (2017-12-01)

Directed energy deposition of AlSi10Mg: Single track nonscalability and bulk properties
by: Parnian Kiani, et al.
Published: (2020-09-01)

Improving ductility of AlSi7Mg alloy by casting-forging process: effect of deformation degree
by: Yongyue Liu, et al.
Published: (2021-09-01)

SOLUTION TREATMENT EFFECT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUTOMOTIVE CAST ALLOY
by: Eva Tillová, et al.
Published: (2012-02-01)

SOLUTION TREATMENT EFFECT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUTOMOTIVE CAST ALLOY
by: Eva Tillová, et al.
Published: (2012-02-01)

Heat Treatments for Stress Relieving AlSi9Cu3 Alloy Produced by Laser Powder Bed Fusion
by: Jacopo Fiocchi, et al.
Published: (2021-07-01)