Numerical investigation of laser beam qulity in thin disk laser with unstable resonator
In this article, M2 factor of a thin disk laser with unstable resonator in two regimes is calculated numerically. In the first case, thermal effects are ignored and the parameters of beam width, divergence angle, radius of wave front curvature and finally, M2 factor of laser beam are calculated by u...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Isfahan University of Technology
2017-09-01
|
| Series: | Iranian Journal of Physics Research |
| Subjects: | |
| Online Access: | http://ijpr.iut.ac.ir/browse.php?a_code=A-10-2473-3&slc_lang=en&sid=1 |
| Summary: | In this article, M2 factor of a thin disk laser with unstable resonator in two regimes is calculated numerically. In the first case, thermal effects are ignored and the parameters of beam width, divergence angle, radius of wave front curvature and finally, M2 factor of laser beam are calculated by using generalized beam parameters. These calculations show that the beam quality of the laser is dependent on the resonator magnification parameter in disk laser. In the second case, thermal effects are considered. In this regime, by using analytical formula for distribution of temperature in crystal and the main contributors to the OPD, M2 factor of thin disk laser is calculated numerically. When the thermal effects are considered, calculations show that the beam quality of thin disk laser is degraded in respect to the condition in which thermal effect was ignored, and also the output power is reduced extremely.
|
|---|---|
| ISSN: | 1682-6957 2345-3664 |