Development verification of coatings made from porous ceramic-matrix composite materials

Development verification of coatings made from porous ceramic-matrix composite materials

The paper presents methodology and results of tests conducted for porous carbon ceramic specimens on a high-temperature gas dynamic facility to simulate real operating conditions for heat shields. The structure of the materials before and after tests is compared.

Bibliographic Details
Main Authors:	Reznik Sergey, Prosuntsov Pavel, Mikhaylovskiy Konstantin
Format:	Article
Language:	English
Published:	EDP Sciences 2018-01-01
Series:	MATEC Web of Conferences
Online Access:	https://doi.org/10.1051/matecconf/201822403019

Similar Items

Simulation of the thermal state of the workpiece made of polymer-matrix composites using microwave radiation
by: Prosuntsov Pavel, et al.
Published: (2019-01-01)

Modelling of thermal and stress-strain state of transformable space structures from hybrid composite materials
by: Mikhaylovskiy Konstanitin, et al.
Published: (2018-01-01)

MIRROR SPACE ANTENNA REFLECTOR MADE OF COMPOSITE MATERIALS CONSTRUCTIVE APPEARANCE DETERMINATION
by: A D Novikov, et al.
Published: (2017-12-01)

Comparison of space antennas mirror reflectors parameters made of composite materials
by: Reznik S.V., et al.
Published: (2017-01-01)

Influence of single-walled carbon nanotubes’ diameter and length on the thermal conductivity of polymer composites
by: Aung Zaw Ye, et al.
Published: (2018-01-01)

Sensors made of carbon ceramic composite materials
by: Zhe-Ming Zhang, et al.

Theoretical and Numerical Characterization of the Thermal Physical Properties of Carbon Ceramic Material
by: Prosuntsov Pavel V., et al.
Published: (2016-01-01)

Sintered ceramic made by mixing waste glass and porous material with controlling humidity ability
by: Shuang-an Lee, et al.
Published: (2009)

Theoretical and numerical characterization of the thermal conductivity of carbon ceramic material from realistic microscale imaging
by: Prosuntsov Pavel V., et al.
Published: (2017-01-01)

Retractation note: Development of the radiant heating facilities for the testing of ceramic materials with operating temperatures up to 2000 K
by: Baldzhiev Riza S., et al.
Published: (2019-01-01)

Withdrawn article: Development of the radiant heating facilities for the testing of ceramic materials with operating temperatures up to 2000 K
by: Baldzhiev Riza S., et al.
Published: (2019-01-01)

Modeling the heat and mass transfer in the pores of the thermal protection carbon-carbon frame during the gas-phase deposition of silicon carbide
by: Reznik Sergey V., et al.
Published: (2017-01-01)

Development of transformable reflectors of mirror space antennas
by: Reznik Sergey, et al.
Published: (2019-01-01)

Development of highly porous carbon and ceramic materials
by: Aoki, Yasuyuki
Published: (1993)

Large-sized transformable space antenna reflector made оf composite materials dynamic modeling process
by: Sergey V Reznik, et al.
Published: (2018-12-01)

Preparation of a Ceramic Matrix Composite Made of Hydroxyapatite Nanoparticles and Polylactic Acid by Consolidation of Composite Granules
by: Elzbieta Pietrzykowska, et al.
Published: (2020-05-01)

Biomorphous ceramics as porous supports for zeolite coating
by: Carlos Renato Rambo, et al.
Published: (2006-01-01)

Mechanical behavior of a ceramic matrix composite material
by: Grosskopf, Paul P.
Published: (2014)

FACADE SYSTEM MADE OF POROUS MATERIALS
by: Zhukov Aleksey Dmitrievich, et al.
Published: (2012-10-01)

CERAMIC NANO-COATINGS ON SPHERICAL POWDERS: ALTERNATIVE METHOD FOR OBTAINING POROUS POWDER MATERIALS
by: P. A. Vityaz, et al.
Published: (2012-12-01)

Thermostabilizing annealing analysis of organomorphic preforms made of oxidized polyacrylonitrile
by: Prosuntsov Pavel, et al.
Published: (2019-01-01)

Research Progress in Environmental Barrier Coatings of SiC Ceramic Matrix Composites
by: LIU Qiao-mu, et al.
Published: (2018-10-01)

Optimal Design and Experimental Verification of Ultrasonic Cutting Horn for Ceramic Composite Material
by: Mibbeum Hahn, et al.
Published: (2021-02-01)

Investigations of Porous Bioglass-Ceramic Materials
by: Hon Jia-fong, et al.
Published: (2008)

Investigations of Porous Bioglass-Ceramic Materials
by: Hon Jia-fong, et al.
Published: (2008)

Investigations of Porous Bioglass-Ceramic Materials
by: Hon Jia-fong, et al.
Published: (2008)

Biocompatible Composite Materials Based on Porous Hydroxyapatite Ceramics and Copolymer of Lactide and Glycolide
by: Daria Lytkina, et al.
Published: (2021-04-01)

Improving the mechanical and bioactivity of hydroxyapatite porous scaffold ceramic with diopside/forstrite ceramic coating
by: sorour sadeghzade, et al.
Published: (2019-01-01)

Standardisation of ceramic matrix composites
by: Gomez Philippe
Published: (2015-01-01)

Sialon ceramic matrix composites
by: Edrees, Hamza J.
Published: (1990)

The study of coating ultra-filtration film on porous ceramic substrate
by: Wang, Wen-Sen, et al.
Published: (1996)

Physical and mechanical properties of ceramic matrix composite materials for bone scaffolds
by: Teerakanok, Supontep
Published: (2021)

Nondestructive evaluation of a high temperature ceramic matrix composite material
by: Trandel, Barbara Dawn
Published: (2014)

CHARACTERIZATION OF CERAMIC MATRIX COMPOSITE MATERIALS USING MILLIMETER-WAVE TECHNIQUES
by: Bischoff, Matthew Lee
Published: (2012)

INVESTIGATION OF PROCESSES ON TREATMENT OF PLASMA COATINGS MADE OF MATERIALS BASED ON MULTIFUNCTIONAL OXIDE CERAMICS WITH LASER IRRADIATION IMPULSES
by: V. A. Okovity, et al.
Published: (2014-08-01)

Pressing of porous bodies made of MR wire material
by: A. I. Ermakov, et al.
Published: (2020-12-01)

Main routes of the porous composite materials creation
by: Pavel G. Kudryavtsev
Published: (2020-10-01)

Studies on the Preparation of Porous Ceramic Supports Using Kaolin/Ceramic Fiber and its Coating Procedures
by: Kao, Ko Bin, et al.
Published: (1998)

Composition and structure of porous heat-resistant inorganic composite materials
by: KUDRYAVTSEV Pavel Gennadievich
Published: (2018-08-01)

Composite Coatings with Ceramic Matrix Including Nanomaterials as Solid Lubricants for Oil-Less Automotive Applications
by: Posmyk A., et al.
Published: (2016-06-01)