Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF

Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF

In comparison with conventional manufacturing technologies, Fused Filament Fabrication (FFF) offers countless benefits. It broadens the horizons of the design of structural components with high geometrical complexity, and lighter elements can be obtained by optimizing the infill of the part. The inf...

Full description

Bibliographic Details
Main Authors:	Albert Forés-Garriga, Marco A. Pérez, Giovanni Gómez-Gras, Guillermo Reyes-Pozo
Format:	Article
Language:	English
Published:	Elsevier 2020-08-01
Series:	Materials & Design
Subjects:	Additive manufacturing Fused filament fabrication PEI Ultem Infill Mechanical properties Constitutive matrix
Online Access:	http://www.sciencedirect.com/science/article/pii/S0264127520303440

Similar Items

The Effect of Annealing on Additive Manufactured ULTEM<sup>™</sup> 9085 Mechanical Properties
by: Yongjie Zhang, et al.
Published: (2021-05-01)

Quasi-Static Tensile and Fatigue Behavior of Extrusion Additive Manufactured ULTEM 9085
by: Pham, Khang Duy
Published: (2018)

Influence of Infill Pattern on the Elastic Mechanical Properties of Fused Filament Fabrication (FFF) Parts through Experimental Tests and Numerical Analyses
by: Jordi Bonada, et al.
Published: (2021-09-01)

Investigating the Effects of Annealing on the Mechanical Properties of FFF-Printed Thermoplastics
by: Javaid Butt, et al.
Published: (2020-04-01)

Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches
by: Enrique Cuan-Urquizo, et al.
Published: (2019-03-01)

Rasters vs Contours For Thin Wall ULTEM 9085 FDM Applications
by: Kota, Vasuman
Published: (2019)

Process Parameters for FFF 3D-Printed Conductors for Applications in Sensors
by: Tibor Barši Palmić, et al.
Published: (2020-08-01)

Hybrid Metal/Polymer Filaments for Fused Filament Fabrication (FFF) to Print Metal Parts
by: Claudio Tosto, et al.
Published: (2021-02-01)

EFFECT OF COATING ON THE SPECIFIC PROPERTIES AND DAMPING LOSS FACTOR OF ULTEM 1010
by: sara mohamad ahmad, et al.
Published: (2021-04-01)

AM-FFF of Objects Using Commercial PLA Based Shape Memory Polymer Printed by an Open-Source 3D Printer
by: N. Dresler, et al.
Published: (2020-12-01)

Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication
by: Santiago Cano, et al.
Published: (2020-07-01)

Manufacturing and Characterization of 3D Miniature Polymer Lattice Structures Using Fused Filament Fabrication
by: Rafael Guerra Silva, et al.
Published: (2021-02-01)

Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment
by: Aboma Wagari Gebisa, et al.
Published: (2018-03-01)

The Surface Characterisation of Fused Filament Fabricated (FFF) 3D Printed PEEK/Hydroxyapatite Composites
by: Krzysztof Rodzeń, et al.
Published: (2021-09-01)

Materials Informatics Approach to Material Extrusion Additive Manufacturing
by: Braconnier, Daniel J
Published: (2018)

In Search of the Optimal Conditions to Process Shape Memory Alloys (NiTi) Using Fused Filament Fabrication (FFF)
by: Pedro Carreira, et al.
Published: (2020-10-01)

Mechanical Properties, Structure and Fracture Behavior of Additive Manufactured FFF-ABS Specimens
by: O. Gewelber, et al.
Published: (2020-12-01)

An Overview of Material Extrusion Troubleshooting
by: Giselle Hsiang Loh, et al.
Published: (2020-07-01)

A Review on Filament Materials for Fused Filament Fabrication
by: Arup Dey, et al.
Published: (2021-06-01)

Feature Engineering for Surrogate Models of Consolidation Degree in Additive Manufacturing
by: Mriganka Roy, et al.
Published: (2021-04-01)

Desktop Fabrication of Strong Poly (Lactic Acid) Parts: FFF Process Parameters Tuning
by: Vladimir E. Kuznetsov, et al.
Published: (2019-06-01)

Identification and Mapping of Manufacturability Constraints for Extrusion-Based Additive Manufacturing
by: Albert E. Patterson, et al.
Published: (2021-04-01)

Dispersion of Ni nanoparticles into Ti(C,N) colloidal filaments for 3D printing by FFF
by: A. Eguiluz, et al.
Published: (2021-03-01)

Experimental analysis of the tensile property of FFF-printed elastomers
by: Lin, X., et al.
Published: (2021)

Evaluation of the Infill Design on the Tensile Response of 3D Printed Polylactic Acid Polymer
by: Tanner David Harpool, et al.
Published: (2021-04-01)

Additive Manufacturing
by: José Costa, et al.
Published: (2021-04-01)

Effect of Extrusion Parameters on Short Fiber Alignment in Fused Filament Fabrication
by: Patrick Consul, et al.
Published: (2021-07-01)

Coalescence in fused filament fabrication process: Thermo-dependent characterization of high-performance polymer properties
by: Arthur Lepoivre, et al.
Published: (2021-06-01)

Generation of Thermotropic Liquid Crystalline Polymer (TLCP)-Thermoplastic Composite Filaments and Their Processing in Fused Filament Fabrication (FFF)
by: Ansari, Mubashir Qamar
Published: (2020)

Effect of geometry on the mechanical response of additively manufactured polymer
by: Yongjie Zhang, et al.
Published: (2021-08-01)

Effect of Infill Pattern, Infill Density, and Infill Angle on the Printing Time and Filament Length of 3D Printing
by: Jaya Suteja
Published: (2021-05-01)

Mechanical Properties of 3D-Printing Polylactic Acid Parts subjected to Bending Stress and Fatigue Testing
by: J. Antonio Travieso-Rodriguez, et al.
Published: (2019-11-01)

In the mix: The effect of wood composition on the 3D printability and mechanical performance of wood-plastic composites
by: Yerong Huang, et al.
Published: (2021-07-01)

Fatigue behavior of PLA-wood composite manufactured by fused filament fabrication
by: J. Antonio Travieso-Rodriguez, et al.
Published: (2020-07-01)

Fatigue Performance of ABS Specimens Obtained by Fused Filament Fabrication
by: Miquel Domingo-Espin, et al.
Published: (2018-12-01)

Reusability of autoclaved 3D printed polypropylene compared to a glass filled polypropylene composite
by: Kristin M. Fischer, et al.
Published: (2021-08-01)

Fused Filament Fabrication Based on Polyhydroxy Ether (Phenoxy) Polymers and Related Properties
by: Christian Brauner, et al.
Published: (2021-05-01)

Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends
by: Gianluca Cicala, et al.
Published: (2018-02-01)

Exploiting Additive Manufacturing Infill in Topology Optimization for Improved Buckling Load
by: Anders Clausen, et al.
Published: (2016-06-01)

PP/organoclay nanocomposites for fused filament fabrication (FFF) 3D printing
by: C. Aumnate, et al.
Published: (2019-10-01)

Cannot write session to /tmp/vufind_sessions/sess_98mk85eli64dvk3hs635q8dkbq