New active machine tool drive mounting on the frame

• Main Authors: Švéda J., Válášek M., Šika Z.
• Format: Article
• Language: English
• Published: University of West Bohemia 2007-10-01
• Series: Applied and Computational Mechanics
• Subjects: Machine tool; Vibrations; Active variant; Control techniques
• Online Access: http://www.kme.zcu.cz/acm/old_acm/full_papers/acm_vol1no1_p038.pdf

The paper deals with the new active mounting of the machine tool drives. The commonly used machine tools are at this time mainly equipped with fix-mounting of the feed drives. This structure causes full transmission of the force shocks to the machine bed and thereby restricts the dynamic properties of the motion axis and the whole machine. The spring-mounting of the feed drives is one of the possibilities how to partially suppress the vibrations. The force that reacts to the machine tool bed is transformed thereby the vibrations are lightly reduced. Unfortunately the transformation is not fully controlled. The new active mounting of the machine tool drives allows to fully control the force behaviour that react to the machine body. Thereby the number of excited frequencies on the machine tool bed is significantly reduced. The active variant of the feed drive mounting is characterized by the synergistic cooperation between two series-connected actuators (“motor on motor”). The paper briefly describes design, control techniques and optimization of the feed drives with the new active mounting conception.