Preparation of Fly ash Based Adsorbents for Removal Active Red X-3B from Dying Wastewater

• Main Authors: Li Jinping, Gan Jinhua, Wu Liang, Yi Juan
• Format: Article
• Language: English
• Published: EDP Sciences 2016-01-01
• Series: MATEC Web of Conferences
• Subjects: fly ash; activate and modify; X-3B dying wastewater; COD; color
• Online Access: http://dx.doi.org/10.1051/matecconf/20166707004

Fly ash with a large number of active sites can occur with the adsorbent chemical and physical adsorption, and therefore have a strong adsorption capacity. The original fly ash and raw fly ash compared to the physical and chemical properties to a significant change. On the fly ash in industrial water treatment application were outlined. The purpose is to focus on the modification methods of fly ash and comparison of raw fly ash and fly ash in the effect of dyeing wastewater. Single factor test method; select the appropriate modifier to study the dosage, pH, stirring time on the modification of adsorption properties of fly ash before and after. The results showed that the modified fly ash was better than the adsorption. Greatly improves on active red X-3B dye wastewater removal capacity, pH = 5, 6, dosage is 5g / L, the mixing time is 30min, COD removal rate reached 73.07%. This modified material can be used as adsorbent for pre-treating dying wastewater.