Thermomechanical behavior of dry contacts in disc brake rotor with a grey cast iron composition
The main purpose of this study is to analysis the thermomechanical behavior of the dry contact between the brake disc and pads during the braking phase. The simulation strategy is based on the calculation code ANSYS11. The modeling of transient temperature in the disk is actually used to identify...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
VINCA Institute of Nuclear Sciences
2013-01-01
|
| Series: | Thermal Science |
| Subjects: | |
| Online Access: | http://www.doiserbia.nb.rs/img/doi/0354-9836/2013/0354-98361100141B.pdf |
| Summary: | The main purpose of this study is to analysis the thermomechanical behavior of the dry contact between the brake disc and pads during the braking phase. The simulation strategy is based on the calculation code ANSYS11. The modeling of transient temperature in the disk is actually used to identify the factor of geometric design of the disk to install the ventilation system in vehicles. The thermal-structural analysis is then used coupling to determine the deformation established and the Von Mises stresses in the disk, the contact pressure distribution in pads. The results are satisfactory compared to those found in the literature. |
|---|---|
| ISSN: | 0354-9836 |