Au Nanoparticles as Interfacial Layer for CdS Quantum Dot-sensitized Solar Cells
<p>Abstract</p> <p>Quantum dot-sensitized solar cells based on fluorine-doped tin oxide (FTO)/Au/TiO<sub>2</sub>/CdS photoanode and polysulfide electrolyte are fabricated. Au nanoparticles (NPs) as interfacial layer between FTO and TiO<sub>2</sub> layer are...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
SpringerOpen
2010-01-01
|
| Series: | Nanoscale Research Letters |
| Subjects: | |
| Online Access: | http://dx.doi.org/10.1007/s11671-010-9705-z |
| Summary: | <p>Abstract</p> <p>Quantum dot-sensitized solar cells based on fluorine-doped tin oxide (FTO)/Au/TiO<sub>2</sub>/CdS photoanode and polysulfide electrolyte are fabricated. Au nanoparticles (NPs) as interfacial layer between FTO and TiO<sub>2</sub> layer are dip-coated on FTO surface. The structure, morphology and impedance of the photoanodes and the photovoltaic performance of the cells are investigated. A power conversion efficiency of 1.62% has been obtained for FTO/Au/TiO<sub>2</sub>/CdS cell, which is about 88% higher than that for FTO/TiO<sub>2</sub>/CdS cell (0.86%). The easier transport of excited electron and the suppression of charge recombination in the photoanode due to the introduction of Au NP layer should be responsible for the performance enhancement of the cell.</p> |
|---|---|
| ISSN: | 1931-7573 1556-276X |