Influence of the reclamation method of spent moulding sands on the possibility of creating favourable conditions for gases flow in a mould

• Main Authors: Łucarz M., Drożyński D.
• Format: Article
• Language: English
• Published: Polish Academy of Sciences 2017-03-01
• Series: Archives of Metallurgy and Materials
• Subjects: spent moulding sands; mechanical reclamation; thermal reclamation; organic binders; ignition losses
• Online Access: http://www.degruyter.com/view/j/amm.2017.62.issue-1/amm-2017-0055/amm-2017-0055.xml?format=INT

The results of investigations concerning the influence of the applied sand matrix (fresh sand, reclaim) on the properties of moulding sands used for production of large dimensional castings (ingot moulds, ladles), are presented in the hereby paper. The performed investigations were aimed at determining the influence of various reclamation methods of spent moulding sands on the quality of the obtained reclaimed material. Moulding sands were prepared on the fresh quartz matrix as well as on sand matrices obtained after various reclamation methods. The selected moulding sand parameters were tested (strength, permeability, grindability, ignition losses, pH reactions). It can be stated, on the basis of the performed investigations, that the kind of the applied moulding sand matrix is of an essential meaning from the point of view of creating conditions minimising formation of large amounts of gases and their directional migration in a casting mould.