Sol-Gel Synthesis and Characterization of Ba1-xGdxTiO3+δ Thin Films on SiO2/Si Substrates Using Spin-Coating Technique

<p>Ba<sub>1-x</sub>Gd<sub>x</sub>TiO<sub>3+δ</sub>, at x = 0, 0.05, 0.1, 0.15, 0.2, (BGT) thin films have been fabricated on SiO<sub>2</sub>/Si substrate using Sol-Gel method. The microstructure and surface morphology of the fabricated films have...

Full description

Bibliographic Details
Main Authors: Yen Chin TEH, Ala’eddin A. SAIF, Prabakaran POOPALAN
Format: Article
Language:English
Published: Kaunas University of Technology 2017-02-01
Series:Medžiagotyra
Subjects:
Online Access:http://matsc.ktu.lt/index.php/MatSc/article/view/13954
Description
Summary:<p>Ba<sub>1-x</sub>Gd<sub>x</sub>TiO<sub>3+δ</sub>, at x = 0, 0.05, 0.1, 0.15, 0.2, (BGT) thin films have been fabricated on SiO<sub>2</sub>/Si substrate using Sol-Gel method. The microstructure and surface morphology of the fabricated films have been investigated using X-ray diffraction (XRD) and atomic force microscopy (AFM). The XRD results show that the fabricated films are crystalline with perovskite structure. There is a shifting of the preferred peak at 31.5<sup>o</sup> to a higher angle as the doping ratio increases suggesting a distortion lattice exists in the films, which could be due to the substitution of Gd<sup>3+</sup> ions into Ba-site. The decreasing of lattice constants confirms the substitution of Gd<sup>3+</sup> in BaTiO<sub>3</sub> lattice structure. The microstrain and dislocation density are found to be increased with the increase of Gd<sup>3+</sup> doping, which attributed to the reduction of lattice volume that due to the ionic size mismatch effect. The AFM results show decreasing trend in both average grain size and roughness parameters. Therefore, the microstructure and surface morphology of BGT samples is strongly dependent on the Gd<sup>3+</sup> doping concentration that mainly due to the difference ionic radius substitution.</p><p>DOI: <a href="http://dx.doi.org/10.5755/j01.ms.23.1.13954">http://dx.doi.org/10.5755/j01.ms.23.1.13954</a></p>
ISSN:1392-1320
2029-7289