COMPARATIVE ANALYSIS OF ACCELERATION METHODS FOR SURFACE ALLOYING IN POWDERY

COMPARATIVE ANALYSIS OF ACCELERATION METHODS FOR SURFACE ALLOYING IN POWDERY

Show other versions (1)

Presented processes of diffusion heat treatment of metal pieces in powdered environment. Proposed method, that is possible accelerate organized of diffusion layers and reduce power expenses. Presented results of practical application of this metod.

Bibliographic Details
Main Authors:	Makar S. Stepanov, Yury M. Dombrovskiy, Yury A. Kornilov
Format:	Article
Language:	Russian
Published:	Don State Technical University 2018-07-01
Series:	Вестник Донского государственного технического университета
Subjects:	hardfacing heat treatment powdered environment for diffusion.
Online Access:	https://vestnik.donstu.ru/jour/article/view/893

Similar Items

COMPARATIVE ANALYSIS OF ACCELERATION METHODS FOR SURFACE ALLOYING IN POWDERY
by: Makar S. Stepanov, et al.
Published: (2011-11-01)

CHOICE OF CARBON POWDERY ENVIRONMENT FOR MICROARC CARBURIZING OF METALWARE
by: Yury Markovich Dombrovskiy, et al.
Published: (2018-06-01)

CHOICE OF CARBON POWDERY ENVIRONMENT FOR MICROARC CARBURIZING OF METALWARE
by: Yury Markovich Dombrovskiy, et al.
Published: (2013-06-01)

EVALUATION OF ELECTRIC CONDUCTIVITY OF CARBON POWDER CARBURIZERS
by: Yury M. Dombrovskiy, et al.
Published: (2018-07-01)

EVALUATION OF ELECTRIC CONDUCTIVITY OF CARBON POWDER CARBURIZERS
by: Yury M. Dombrovskiy, et al.
Published: (2011-12-01)

NEW ASPECTS OF SURFACE IMPREGNATION IN POWDER ENVIRONMENT
by: Yury M. Dombrovskiy, et al.
Published: (2018-07-01)

NEW ASPECTS OF SURFACE IMPREGNATION IN POWDER ENVIRONMENT
by: Yury M. Dombrovskiy, et al.
Published: (2011-09-01)

Laser creation of padding welds hard, abrasion and corrosion resistant
by: Artur Wypych
Published: (2017-10-01)

Wear Resistance of Sintered Composite Hardfacings under Different Abrasive Wear Conditions
by: Taavi SIMSON, et al.
Published: (2017-08-01)

Selected Properties of Hardfacing Layers Created by PTA Technology
by: Janette Brezinová, et al.
Published: (2021-01-01)

Effects of Travel Speed on the Microstructure and Abrasion Resistance of Hardfacing Alloys Deposited with Composite Powder Particles and Solid Wire
by: Huiwen Yao, et al.
Published: (2020-06-01)

In situ formation of molybdenum borides at hardfacing by arc welding with flux-cored wires containing a reaction mixture of B4C/Mo
by: Pavlo Prysyazhnyuk, et al.
Published: (2020-08-01)

The performance on the method of welding in intermetallic alloy FeAl coating on the structural steel
by: Janusz Cebulski, et al.
Published: (2017-03-01)

The influence of chromium content on wear and corrosion behavior of surface alloyed steel with Fe(16−x)Crx(B,C)4 electrode
by: Engin Kocaman, et al.
Published: (2021-04-01)

Investigations on different hardfacing processes for High temperature applications of Ni-Cr-B-Si alloy hardfaced on austenitic stainless steel components
by: S Balaguru, et al.
Published: (2020-09-01)

Microstructural and Erosive Wear Characteristics of a High Chromium Cast Iron
by: Annalisa Fortini, et al.
Published: (2021-04-01)

Industrial surfacing and hardfacing technology, fundamentals and applications
by: Andrzej Klimpel
Published: (2020-02-01)

Wear Characteristics of Hardfacing Coatings Obtained by Tungsten Inert Gas Method
by: Krzysztof Dziedzic, et al.
Published: (2019-12-01)

Influencia del Aporte Térmico Sobre la Microestructura en Recargues Duros Multicomponentes (Cr, Mo, W, Nb, C, B) Nanoestructurados Base Hierro
by: A. Gualco, et al.
Published: (2017-10-01)

Plasma Transferred ARC (PTA) Hardfacing of Recycled Hardmetal Reinforced Nickel-matrix Surface Composites
by: Arkadi ZIKIN, et al.
Published: (2012-03-01)

Structure and Construction Assessment of the Surface Layer of Hardfaced Coating after Friction
by: Krzysztof Dziedzic, et al.
Published: (2017-09-01)

Comparison of Plasma Transferred Arc and Submerged Arc Welded Abrasive Wear Resistant Composite Hardfacings
by: Taavi SIMSON, et al.
Published: (2018-05-01)

Metallurgical Characterization of a Weld Bead Coating Applied by the PTA Process on the D2 Tool Steel
by: Ali Tahaei, et al.

Correlation between Travel Speed, Microstructure, Mechanical Properties and Wear Characteristics of Ni-Based Hardfaced Deposits over 316LN Austenitic Stainless Steel
by: Gnanasekaran S., et al.
Published: (2019-02-01)

Comparison of Properties of Hardfaced Layers Made by a Metal-Core-Covered Tubular Electrode with a Special Chemical Composition
by: Artur Czupryński
Published: (2020-11-01)

Intermetallic coatings produced in melting and alloying process
by: Grzegorz Gontarz, et al.
Published: (2015-09-01)

The effect of the preheating on to properties of the wear resistant welds
by: Marek Gucwa, et al.
Published: (2020-03-01)

Application of cladded abrasive-resistant plates in repairs of opencast mining equipment
by: Tadeusz Mucha, et al.
Published: (2011-10-01)

The laboratory tests of hybrid layers combining hardfacing and nitriding dedicated to increase the durability of forging tools in hot forging processes
by: Paweł Widomski, et al.
Published: (2019-02-01)

Development of ferro-alloy hardfacing for high abrasion and low impact wear applications
by: Chijioke Okechukwu, et al.
Published: (2018-04-01)

Effect of Silicon on <i>M</i><sub>7</sub>C<sub>3</sub> Phases and Abrasion Resistance of Open Arc Hardfacing Alloys
by: TIAN Bing, et al.
Published: (2017-04-01)

The influence of the cooling method on shortening the cycle of multi-layer arc-surfacing of thin walls
by: Paweł Cegielski, et al.
Published: (2019-01-01)

Development of hardfaced crusher jaws using ferro-alloy hardfacing inserts and low carbon steel substrate
by: Chijioke Okechukwu, et al.
Published: (2018-09-01)

The use of a measuring arm with a laser scanner for analysis and support of regenerative surfacing processes of forging dies
by: Marcin D. Kaszuba, et al.
Published: (2020-04-01)

Remelting of Inconel 713C alloy by laser and plasma arc
by: Janusz Adamiec, et al.
Published: (2017-05-01)

Study of the effect of the main parameters of plasma surfacing on the geometry of the welds overlays based on the design of experiment method
by: Mariusz Bober
Published: (2017-04-01)

The Development and Processing of Novel Aluminum Powder Metallurgy Alloys for Heat Sink Applications
by: Smith, Logan
Published: (2013)

Modyfikacja struktury i właściwości napoin wykonanych łukiem krytym
by: Jacek Górka, et al.
Published: (2011-10-01)

Regeneracja zaworów silników okrętowych metodą napawania laserowego
by: Hanna Smoleńska, et al.
Published: (2011-09-01)

Thermodynamic simulation as an assistant tool in the development of iron based hardfacing materials
by: Edmilson Otoni Correa, et al.
Published: (2007-09-01)