Film Cooling from a Single Row of Compound Angle Holes at High Blowing Ratios

• Main Authors: Phillip M. Ligrani, Joon Sik Lee
• Format: Article
• Language: English
• Published: Hindawi Limited 1996-01-01
• Series: International Journal of Rotating Machinery
• Subjects: Gas Turbines; Film Cooling; Compound Angle Holes; Turbine Blades; Film Effectiveness.
• Online Access: http://dx.doi.org/10.1155/S1023621X96000139

Experimental results are presented which describe the development and structure of flow downstream of a single row of holes with compound angle orientations producing film cooling at high blowing ratios. This film cooling configuration is important because similar arrangements are frequently employed on the first stage of rotating blades of operating gas turbine engines. With this configuration, holes are spaced 6d apart in the spanwise direction, with inclination angles of 24 degrees, and angles of orientation of 50.5 degrees. Blowing ratios range from 1.5 to 4.0 and the ratio of injectant to freestream density is near 1.0. Results show that spanwise averaged adiabatic effectiveness, spanwise-averaged iso-energetic Stanton number ratios, surveys of streamwise mean velocity, and surveys of injectant distributions change by important amounts as the blowing ratio increases. This is due to injectant lift-off from the test surface just downstream of the holes.