ANALYSIS OF DECREASE MACHINABILITY POSSIBLE CAUSES FOR CLAIMED ALLOY
The Faculty of Production Technology and Management is often asked by companies with a request to solve a specific technical task. One of these tasks was the analysis of aluminum alloy worsened machinability when the rods from this alloy exhibited against assumption significantly worse (longer) chip...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Society of Polish Mechanical Engineers and Technicians
2016-09-01
|
| Series: | Advances in Science and Technology Research Journal |
| Subjects: | |
| Online Access: | http://www.journalssystem.com/astrj/ANALYSIS-OF-DECREASE-MACHINABILITY-POSSIBLE-CAUSES-FOR-CLAIMED-ALLOY,64073,0,2.html |
| Summary: | The Faculty of Production Technology and Management is often asked by companies with a request to solve a specific technical task. One of these tasks was the analysis of aluminum alloy worsened machinability when the rods from this alloy exhibited against assumption significantly worse (longer) chips during machining. The alloy was complaint and, of course, it created economic damage. Obviously, the company was interested in the causes of this alloy behavior change that could possibly generate future complaints procedures to defend itself better, or to avoid mistakes in the production of the material. At the faculty analysis that could contribute to identifying the cause of the worsened machinability were done. |
|---|---|
| ISSN: | 2080-4075 2299-8624 |