Recommended Drilling Parameters of Tungsten Carbide Round Drills for the Most Optimal Bone Removals in Oral Surgery

Recommended Drilling Parameters of Tungsten Carbide Round Drills for the Most Optimal Bone Removals in Oral Surgery

Background. High temperatures during drilling can cause thermal osteonecrosis and abnormal wound healing. According to our best knowledge, a widely accepted recommendation for optimal drilling parameters in routine oral surgery bone removals does not exist. Purpose. Our aim was to investigate the co...

Full description

Bibliographic Details
Main Authors:	József Szalma, Ole Klein, Bálint Viktor Lovász, Edina Lempel, Sára Jeges, Lajos Olasz
Format:	Article
Language:	English
Published:	Hindawi Limited 2018-01-01
Series:	BioMed Research International
Online Access:	http://dx.doi.org/10.1155/2018/3108581

Similar Items

Assessment of Cutting Performance of Cemented Tungsten Carbide Drills in Drilling Multidirectional T700 CFRP Plate
by: Mohsin Ali, et al.
Published: (2018-07-01)

Study of the tribology characteristics of tungsten carbide micron-drill on PCB
by: shih-chen shih, et al.
Published: (2001)

TEGDMA (Triethylene Glycol Dimethacrylate) Induces Both Caspase-Dependent and Caspase-Independent Apoptotic Pathways in Pulp Cells
by: Bálint Viktor Lovász, et al.
Published: (2021-02-01)

Measurement of bit-rock interface temperature and wear rate of the tungsten carbide drill bit during rotary drilling
by: Vijay Kumar Shankar, et al.
Published: (2020-04-01)

A Study on Welding Parameter of Tungsten Carbide Drill Bits for Printed Circuit Boards
by: 陳蓬萊
Published: (2019)

Cost Index Model for the Process Performance Optimization of Micro-EDM Drilling on Tungsten Carbide
by: Gianluca D’Urso, et al.
Published: (2017-08-01)

Wear Resistance Improvement of Cemented Tungsten Carbide Deep-Hole Drills after Ion Implantation
by: Dmitrij Morozow, et al.
Published: (2021-01-01)

Influence of Micro Shot Peening on the Durability of Tungsten Carbide Bits for Drilling Printed Circuit Boards
by: Jong-Yih Tsai, et al.
Published: (2006)

The development of a binder system and process for the manufacture of large diameter tungsten carbide drill blanks
by: Blackham, Benjamin Luke
Published: (2015)

Evaluation of drilling Al/B4C composites with carbide drills
by: Ali Rıza Motorcu, et al.
Published: (2016-08-01)

Investigating Tungsten Carbide Micro-Hole Drilling Characteristics by Desktop Micro-ECM with NaOH Solution
by: Yung-Yi Wu, et al.
Published: (2018-10-01)

Development of a new approach for modelling the tribocorrosion of cemented tungsten carbide in oil and gas drilling environments
by: Herd, Stephen
Published: (2017)

On the Nature of Cemented Carbide Wear in Rock Drilling
by: Beste, Ulrik
Published: (2004)

The Study of Ultrasonic-Assisted Drilling of Silicon Carbide
by: Ying-Han Peng, et al.
Published: (2014)

The research of tungsten-dopedhydrogen-free diamond-like carbonmicron drills on PCB micro hole drilling
by: Jung-Kai Chen, et al.
Published: (2002)

The research of tungsten-dopedhydrogen-free diamond-like carbonmicron drills on PCB micro hole drilling
by: Jung-Kai Chen, et al.
Published: (2002)

Decision analysis: determining the most appropriate drilling method for production drilling in underground mining
by: Gransell, Fredrik
Published: (2016)

Performance of TiAlN PVD Coated Carbide Drill when Drilling Titanium 6246 Alloy
by: Darsin Mahros, et al.
Published: (2017-01-01)

Analyses of process parameters influence on the drilling process by using carbide drills for steel St52-3
by: Popan Ioan Alexandru, et al.
Published: (2017-01-01)

Use of an Industrial Tungsten Carbide Drill in the Treatment of a Complex Fracture in a Patient with Severe Osteopetrosis: A Case Report
by: Kunnasegaran R, et al.
Published: (2017-03-01)

Desktop Micro-EDM System for High-Aspect Ratio Micro-Hole Drilling in Tungsten Cemented Carbide by Cut-Side Micro-Tool
by: Yung-Yi Wu, et al.
Published: (2020-07-01)

Machinability study of coated and uncoated carbide tools in drilling inconel 718
by: Rival, Rival
Published: (2014)

Tungsten Carbide Processing and Applications
Published: (2012)

Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy
by: Abd. Rahim, Erween
Published: (2005)

Optimization of roundness error in deep hole drilling using cuckoo search algorithm
by: Mohamad, Azizah, et al.
Published: (2019)

The Study of Geometry of the Drill in Drilling Process
by: Chen, Wen-chi, et al.
Published: (2009)

Development of a wear test for the evaluation of cemented carbides used in rotary drilling applications
by: Moura, Carlos Filipe Afonso
Published: (2009)

Improved version of BTA deep-hole drilling tools with staggered disposable carbide inserts
by: Torabi, Seyed J
Published: (1990)

Machinability study of uncoated and coated carbide tools when drilling CFRP/metal stacks
by: Mahamad Hakimi, Ismail
Published: (2015)

Drilling
Published: (2018)

Haiti-Drill: an amphibious drilling project workshop
by: C. Aiken, et al.
Published: (2020-12-01)

Drilling Burr Minimization by Changing Drill Geometry
by: Emilia Franczyk, et al.
Published: (2020-07-01)

Drilling optimization using drilling simulator software
by: Salas Safe, Jose Gregorio
Published: (2004)

The study of drilling mechanics of deep hole drill
by: Chen, Huang-Jin, et al.

Sensing of drill wear and prediction of drill life
by: Subramanian, Krishnamoorthy
Published: (2005)

Peculiarities of carbon fiber drilling
by: Ruslan Yu. Melentiev, et al.
Published: (2014-12-01)

The torque-thrust coupling effect in twist drills and its influence on drill characteristics and drilling forces
by: Kramadhati, Narasimha
Published: (1988)

The Effect of Soil Content, Drilling Parameters and Drilling Tool Diameter on the Vibration Assessment in the Drilling Rig
by: Mauwafak Ali Tawfik, et al.
Published: (2014-12-01)

The Effect of Soil Content, Drilling Parameters and Drilling Tool Diameter on the Vibration Assessment in the Drilling Rig
by: Mauwafak Ali Tawfik, et al.
Published: (2015-03-01)

Modeling of burr size in drilling of aluminum silicon carbide composites using response surface methodology
by: Avinash A. Thakre, et al.
Published: (2016-09-01)