Influence of initial imperfections on ultimate strength of spherical shells

Influence of initial imperfections on ultimate strength of spherical shells

Comprehensive consideration regarding influence mechanisms of initial imperfections on ultimate strength of spherical shells is taken to satisfy requirement of deep-sea structural design. The feasibility of innovative numerical procedure that combines welding simulation and non-linear buckling analy...

Full description

Bibliographic Details
Main Authors:	Chang-Li Yu, Zhan-Tao Chen, Chao Chen, Yan-ting Chen
Format:	Article
Language:	English
Published:	Elsevier 2017-09-01
Series:	International Journal of Naval Architecture and Ocean Engineering
Subjects:	Ultimate strength Spherical shells Residual stress Initial imperfections Submersibles
Online Access:	http://www.sciencedirect.com/science/article/pii/S209267821630440X

Similar Items

Most adverse geometrical imperfections of steel spherical shells
by: Paweł Błażejewski, et al.
Published: (2014-09-01)

Effect of Residual Stresses on the Elastoplastic Behavior of Welded Steel Plates
by: José Manuel Gordo
Published: (2020-09-01)

Non-linear buckling analysis of imperfect thin spherical pressure hull for manned submersible
by: SB. Pranesh, et al.
Published: (2017-12-01)

Influence of Initial Imperfections on the Laterally Loaded Cylindrical Shell
by: Ondřej VOLTR, et al.
Published: (2013-06-01)

Probabilistic ultimate strength analysis of submarine pressure hulls
by: Burak Can Cerik, et al.
Published: (2013-03-01)

Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
by: Heorhii V. Filatov
Published: (2020-03-01)

Ultimate torsional strength of cracked stiffened box girders with a large deck opening
by: Lei Ao, et al.
Published: (2016-07-01)

Residual Ultimate Strength of Box Girders with Variable Cracks
by: Lei Ao, et al.
Published: (2015-06-01)

Experimental and Numerical Investigations of Ultimate Strength of Imperfect Stiffened Plates of Different Slenderness
by: Woloszyk Krzysztof, et al.
Published: (2020-12-01)

Influence of asymmetrical initial form imperfections on fre oscillations of thin shells
by: S. V. Seregin
Published: (2016-12-01)

Effects of toroidal transition on ultimate bearing capacity of submarine cone-cone connection structures
by: JING Teng, et al.
Published: (2020-08-01)

Dynamic Analysis of Thin CompositeCylindrical and Spherical Shells
by: Qusai H. Jebur
Published: (2008-01-01)

RESIDUAL HULL GIRDER ULTIMATE STRENGTH OF A DOUBLE HULL OIL TANKERS
by: Jerolim Andrić, et al.
Published: (2015-09-01)

Assessment of residual ultimate strength of cracked plates under biaxial compression
by: LU Yabing, et al.
Published: (2017-10-01)

Influence of cracks and pitting corrosion on residual ultimate strength of stiffened plates
by: ZHANG Jing, et al.
Published: (2018-02-01)

Inelastic Analysis of Tripping Failure of Stiffened Steel Panels due to Stiffener Flange Transverse Initial Eccentricity
by: Patten, Scott
Published: (2014)

Effects of Key Factors on Hull Girder Ultimate Strength Estimation by Progressive Collapse Calculations
by: Hasan Ölmez, et al.

Research development of buckling and ultimate strength of hull plate and stiffened panel
by: CHEN Yanting, et al.
Published: (2017-01-01)

Analysis of ultimate limit state of spherical shell / Sferinio kevalo saugos ribinio būvio analizė
by: Tomas Ulitinas, et al.
Published: (2013-07-01)

Structural Finite Element Simulation and Evaluation Method for Ship Collision Damage and Residual Strength of the Jacket
by: REN Hao, et al.
Published: (2021-09-01)

Effect of soaking seeds of flax on the ultimate strength of flaxes
by: E. I. Ponomareva, et al.
Published: (2017-08-01)

Buckling, Postbuckling and Imperfection Sensitivity Analysis of Different Type of Cylindrical Shells by Hui's Postbuckling Method
by: Xu, Hailan
Published: (2013)

Quasi-bifurcation and Imperfection-sensitivity of Cylindrical ‎Shells under Pressures due to an Explosion
by: Mariano Ameijeiras, et al.
Published: (2021-04-01)

Temperature and Pressure Dependent Creep Stress Analysis of Spherical Shell
by: Pathania D.S., et al.
Published: (2019-03-01)

Dynamic behaviors of visco-elastic thin-walled spherical shells impact onto a rigid plate
by: X.W. Zhang, et al.

The study of the influence of initial mast shaft imperfections on the values of internal forces and the effort of mast structure
by: Monika Matuszkiewicz
Published: (2014-09-01)

Ultimate strength of stiffened plates with pitting corrosion
by: Ahmad Rahbar-Ranji, et al.
Published: (2015-05-01)

Effects of localized geometric imperfections on the stress behavior of pressurized cylindrical shells
by: Rinehart, Adam James
Published: (2004)

On the method of calculation of buckling and post-buckling behavior of laminated shells with small arbitrary imperfections
by: Mykola Semenyuk, et al.
Published: (2021-07-01)

Analysis of Ultimate Compressive Strength of Cracked Plates with the Use of DoE Techniques
by: Woloszyk Krzysztof, et al.
Published: (2020-09-01)

Elastic and plastic buckling of spherical shells under various loading conditions.
by: Nayyeri Amiri, Shahin
Published: (2011)

Frequency optimization of laminated composite spherical shells
by: Topal Umut
Published: (2012-12-01)

Ultimate Strength Analysis of Stiffened Panels Using a Beam-Column Method
by: Chen, Yong
Published: (2014)

Effects of Collision Damage on the Ultimate Strength of FPSO Vessels
by: Muhammad Zubair Muis Alie, et al.
Published: (2020-04-01)

Numerical Investigation on Ultimate Compressive Strength of Welded Stiffened Plates Built by Steel Grades of S235–S390
by: Chenfeng Li, et al.
Published: (2019-05-01)

Ultimate Longitudinal Strength of Composite Ship Hulls
by: Zhang Xiangming, et al.
Published: (2017-01-01)

Temperature Condition and Spherical Shell Shape Variation of Space Gauge-Alignment Spacecraft
by: V. S. Zarubin, et al.
Published: (2016-06-01)

Behaviour of thin-walled cylindrical and conical shells: Carbon vs. stainless steel
by: Kostadinović-Vranešević Kristina, et al.
Published: (2019-01-01)

Residual ultimate strength of a very large crude carrier considering probabilistic damage extents
by: Joonmo Choung, et al.
Published: (2014-03-01)

A parametric study on effects of pitting corrosion on stiffened panels’ ultimate strength
by: Liang Feng, et al.
Published: (2020-01-01)

Cannot write session to /tmp/vufind_sessions/sess_q8dh6p62d9ghtk39qivlcvamjo