DETERMINATION OF THE POLISHING QUALITY IN THE WORKING CHANNEL OF THE DRAWING OF CARBIDE TOOLS PRODUCED BY OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»

DETERMINATION OF THE POLISHING QUALITY IN THE WORKING CHANNEL OF THE DRAWING OF CARBIDE TOOLS PRODUCED BY OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»

The quality of the drawing tool depends on the quality of the channel. Channel processing is carried out in order to obtain the desired geometric shape, required size and limit deviations in accordance with the size and quality of the wire stretched, as well as to obtain the required purity of the s...

Full description

Bibliographic Details
Main Authors:	T. P. Kurenkova, I. V. Borisovets, I. P. Lazebnikova
Format:	Article
Language:	English
Published:	Belarusian National Technical University 2018-07-01
Series:	Litʹë i Metallurgiâ
Subjects:	surface roughness microrelief polishing quality draw die channel visual inspection.
Online Access:	https://lim.bntu.by/jour/article/view/2223

Similar Items

Motivation of personnel at OJSC «BSW – Management Company of the Holding «BMC»
by: N. S. Rabinovich, et al.
Published: (2020-01-01)

Influence of roughness of a landing aperture of a frame on quality of production of the drawing tool and process of wire drawing
by: I. N. Radzkova, et al.
Published: (2020-01-01)

DETERMINING THE QUALITY OF POLISHING AND ROUGHNESS PARAMETER OF THE WORKING CHANNEL HARD ALLOY DRAWING TOOL PRODUCTION OF «BSW – MANAGEMENT COMPANY OF «BMC»
by: T. P. Kurenkova, et al.
Published: (2013-08-01)

ANALYSIS OF ASTUE AT OJSC «BSW – MANAGEMENT COMPANY OF «BMC» HOLDING» ON THE BASIS OF SINIS
by: S. V. Demyanov
Published: (2013-08-01)

The experience of using calcium carbide for the deoxidation of steel to replace aluminum in the conditions of OJSC «BSW – Management company of the holding «BMC»
by: О. M. Grudnitsky
Published: (2020-06-01)

CENTRALIZATION OF SERVICE MANAGEMENT WORK EXPERIENCE OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: A. A. Tsidrenkov
Published: (2017-10-01)

The requirements of the international standards on traceability of measurement results at OJSC «BSW – Management Company of Holding «BMC»
by: E. V. Borisenko, et al.
Published: (2019-04-01)

CARRYING OUT OF MEASUREMENT SYSTEM ANALYSIS (MSA) ON OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: E. V. Borisenko, et al.
Published: (2017-07-01)

EXPERIENCE WITH THE USE OF THE CLIMATIC CHAMBER FOR ARTIFICIAL AGEING PRODUCTS AT OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: M. I. Akatyeva
Published: (2018-07-01)

Feasibility and design study of investment projects in metallurgy by the example of OJSC «BSW – Management Company of the Holding «BMC»
by: A. V. Karmanovich, et al.
Published: (2020-06-01)

IR IMAGING AND VIBRATORY METHODS OF CONTROL AND DIAGNOSTICS OF THE EQUIPMENT AT OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: A. S. Shinkarev, et al.
Published: (2018-01-01)

THE ORGANIZATION OF INTERLABORATORY COLLATING TESTS IN THE CENTRAL FACTORY LABORATORY OF THE OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: G. N. Voronina
Published: (2017-10-01)

Development and implementation of an automated system of optimal bar cutting at the mill 370/150 at OJSC «BSW – Management Company of the Holding «BMC»
by: I. A. Pankovets
Published: (2020-01-01)

WAYS TO INCREASE QUALITY OF PRODUCTS AT THE BAR STOCK WIRE ROLL MILL 150 IN OJSC «BSW» – MANAGEMENT COMPANY OF HOLDING «BMC»
by: I. A. Zuyeu,, et al.
Published: (2017-10-01)

WAYS TO INCREASE QUALITY OF PRODUCTS AT THE BAR STOCK WIRE ROLL MILL 150 IN OJSC «BSW» – MANAGEMENT COMPANY OF HOLDING «BMC»
by: I. A. Zuyeu,, et al.
Published: (2017-01-01)

THE CHOICE OF ECONOMICALLY EXPEDIENT USE OF FERROUS METALS CHIPS IN ARC STEEL-SMELTING FURNACES ON OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: A. I. Rozhkov, et al.
Published: (2017-10-01)

The increase in turnover of steel-teeming ladles with a combined lining at the steelmaking production in OJSC «BSW – Management Company of Holding «BMC»
by: A. L. Artamoshin, et al.
Published: (2019-10-01)

Ensuring the safety of the surface of calibrated rolled products in the conditions of small-grade wire mill 370/150 OJSC «BSW – Management Company of the Holding «BMC»
by: I. A. Kovaleva, et al.
Published: (2020-01-01)

EXPERIENCE IN USE OF RECUPERATIVE BURNERS DEVICES IN FURNACES OF PERIODIC ACTION FOR HEAT TREATMENT OF BLANKS IN SPC-2 OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: D. S. Jadchenko
Published: (2018-01-01)

Research of defects of hot-rolled steel having rolling nature of formation of the rolling shop no. 1 of rolling mill 850 at OJSC «BSW – Management Company of Holding «BMC»
by: I. A. Kovaleva, et al.
Published: (2019-08-01)

Marine Coastline Polygonal Ridges and Surface Roughness Development on a Salt-Crusted Playa: Recognition by Structure-from-Motion Photogrammetry
by: Yuyang Geng, et al.
Published: (2019-03-01)

DETERMINATION OF OPTIMAL CUTTING CONDITIONS FOR HIGH-SPEED CENTERLESS TURNING OF ALLOY STEEL BRAND 42CRMO4 AT OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: O. Filonchik
Published: (2018-04-01)

APPLICABILITY OF THE RESULTS OF CERTIFICATION OF WORKPLACES ON WORKING CONDITIONS AT OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMС»
by: I. V. Korotkevich, et al.
Published: (2018-01-01)

Development of Decoupling Device for Vibration-Assisted Roller Polishing of Silicon Carbide Ceramics
by: Yan Gu, et al.
Published: (2020-01-01)

Influences of Different Die Bearing Geometries on the Wire-Drawing Process
by: Gustavo Aristides Santana Martinez, et al.
Published: (2019-10-01)

MASTERING THE PRODUCTION OF A CONTINUOUS CASTING BILLET DIAMETER 200 MM FROM CHROME-MOLYBDENUM STEEL GRADES FOR THE PRODUCTION OF SEAMLESS PIPES AT THE OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: I. А. Bondarenko, et al.
Published: (2018-01-01)

EFFECTIVENESS OF STATIC THYRISTOR COMPENSATORS SYSTEMS ON THE EXAMPLE OF OJSC «BSW»
by: A. I. Rozhkov, et al.
Published: (2017-03-01)

USE OF NEW TYPES OF SLIDE SHUTTERS IN THE JSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: I. A. Bondarenko, et al.
Published: (2016-12-01)

WAYS TO INCREASE PLASTIC PROPERTIES OF A WIRE IN THE CONDITIONS OF DRAWING OF HARDWARE PRODUCTION OF JSC «BSW MANAGEMENT COMPANY OF HOLDING «ВМС»
by: S. V. Voytenkov, et al.
Published: (2015-11-01)

Selection of the optimal version of the rolling rings of stand no. 7 of mill 150 of OJSC “BSW Management Company of Holding “BMC” from various types of high-speed steel, providing the best indicator of operational durability
by: I. A. Guzova, et al.
Published: (2020-01-01)

DEVELOPMENT OF THE PERSPECTIVE REINFORCING MATERIALS FOR CONCRETE ON JSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: T. A. Akhmetov, et al.
Published: (2016-08-01)

Application of Digital Elevation Model (DEM) for description of soil microtopography changes in laboratory experiments
by: Stańczyk Tomasz, et al.
Published: (2016-12-01)

Die geometry induced heterogeneous morphology of polypropylene inside the die during die-drawing process
by: Lyu, D., et al.
Published: (2019)

Development of a method for effective strengthening rolled rebar with diameter of 8 mm of ordinary quality steel in terms of mill 320 SPC-1 at OJSC «BSW – Management Company of the Holding «BMC»
by: O. M. Kirilenko, et al.
Published: (2020-04-01)

Die Design in Drawing with Drawbeads and Spacers
by: Advaith Narayanan, .
Published: (2019)

THE USE OF ENERGY EFFICIENT TECHNOLOGIES IN THE FRAMEWORK OF IMPLEMENTATION OF INVESTMENT PROJECT «ORGANIZATION OF PRODUCTION OF ROLLED BAR IRON WITH THE CONSTRUCTION OF SMALL-SECTION WIRE ROLLING MILL» OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: N. I. Anelkin, et al.
Published: (2018-04-01)

The Analysis of Force Parameters in Drawing Process of High Carbon Steel Wires in Conventional and Hydrodynamic Dies
by: Suliga M.
Published: (2017-12-01)

Direct flow drawing equipment performance reliability and increase of its effectiveness
by: Ivanova Veronica, et al.
Published: (2019-01-01)

REDUCTION OF SPECIFIC CONSUMPTION OF FUEL AN DENERGY RESOURCES AT THE JSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»
by: A. L. Sugoyd
Published: (2016-01-01)

Structure evolution and orientation mechanism of long-chain-branched poly (lactic acid) in the process of solid die drawing
by: Li, J., et al.
Published: (2019)