Research on the improvement of test methods for the determination of dust penetration in enclosures of equipment intended for explosive atmospheres

• Main Authors: Vătavu Niculina, Jurca Adrian, Vătavu Sorin, Gabor Dan
• Format: Article
• Language: English
• Published: EDP Sciences 2020-01-01
• Series: MATEC Web of Conferences
• Online Access: https://www.matec-conferences.org/articles/matecconf/pdf/2020/01/matecconf_sesam20_00063.pdf

Carcasses of electrical or non-electrical equipment operating in potentially explosive atmospheres must provide a certain degree of protection against access to hazardous parts, penetration of solid bodies and/or water penetration, which must be tested according to the specifications of the Ex protection types. Normal protection classes are indicated by the international IP code followed by two characteristic digits referring to the protection against penetration of solid foreign bodies and water protection, followed by optional letters if required by the beneficiary according to the imposed conditions of use. Within the ENExEMEIP laboratory, have been developed laboratory tests to verify the first characteristic figure of the standard degree of protection according to the standardized European method. In the paper is presented the test stand of the large gauge equipment, a stand made with state-of-the-art equipment that provides the necessary performance for the accreditation of the test according to the standardized requirements. Checking dustproof protection to equipment used in areas where explosive atmospheres generated by combustion dust may occur is particularly important for assessing compliance with the requirements of the ATEX Directive [5], as this protection is a basic requirement for explosion protection.