EXPERIMENTAL INVESTIGATION OF THE TOOL-CHIP INTERFACE TMPERATURES ON UNCOATED CEMENTIDE CARBIDE CUTTING TOOLS
It is known that the temperature as the result of the heat developed during machining at the tool-chip interface has an influence on the tool life and workpiece surface guality and the methods for measuring this temperature are constantly under investigation. In this study, the measurement of tool-c...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Pamukkale University
2005-01-01
|
| Series: | Pamukkale University Journal of Engineering Sciences |
| Subjects: | |
| Online Access: | http://dergipark.ulakbim.gov.tr/pajes/article/view/5000089417 |
| Summary: | It is known that the temperature as the result of the heat developed during machining at the tool-chip interface has an influence on the tool life and workpiece surface guality and the methods for measuring this temperature are constantly under investigation. In this study, the measurement of tool-chip interface temperature using toolworkpiece termocouple method was investigated. The test were carried out on a AISI 1040 steel and the toolchip interface temperature variation was examined depending on the cutting speed and feed rate. The obtained groups show that cutting speed has more influence on the temperature than feedrate has. |
|---|---|
| ISSN: | 1300-7009 2147-5881 |