PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD LAMINATED WITH THERMALLY COMPRESSED VENEER

PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD LAMINATED WITH THERMALLY COMPRESSED VENEER

The aim of this study was to investigate the effects of thermally compressed veneer laminating on some of the physical and mechanical properties of particleboard. Oriental beech (Fagus orientalis Lipsky) veneers were compressed under various press conditions. Commercially produced particleboard samp...

Full description

Bibliographic Details
Main Author:	Ümit Büyüksarı
Format:	Article
Language:	English
Published:	North Carolina State University 2012-01-01
Series:	BioResources
Subjects:	Particleboard Lamination Thermal compression Thickness swelling Water absorption Modulus of elasticity Bending strength
Online Access:	http://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_07_1_1084_Buyuksari_Phys_Mechan_Prop_Particleboard_Heat/1380

Similar Items

The impact of reeds residue addition on physical and mechanical properties of particleboard made from pomegranate prunings
by: Reza Hajihassani, et al.
Published: (2012-03-01)

STUDY ON THE POSSIBILITY OF MANUFACTURING PARTICLEBOARD WITH PAPER SLUDGE AND WOOD CHIPS
by: asghar tarmian, et al.
Published: (2004-10-01)

DETERMINATION OF SUITABILITY OF DOUGLAS-FIR (Pseudotsuga menziesii (Mirb.) Franco) SPECIES FOR PARTICLEBOARD PRODUCTION
by: Gökay Nemli, et al.
Published: (2002-04-01)

Investigation of applying the old corrugated container (OCC) and aspen chips in particleboard production
by: Amir Eshraghi, et al.
Published: (2010-03-01)

Effect of Veneer-Drying Temperature on Selected Properties and Formaldehyde Emission of Birch Plywood
by: Pavlo Bekhta, et al.
Published: (2020-03-01)

Mechanical and physical properties of Kelempayan (Neolamarckia cadamba) particleboard
by: Jamaludin, K., et al.
Published: (2018)

THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION
by: Hossein Hosseinkhani, et al.
Published: (2000-09-01)

THE EFFECT OF MAT MOISTURE CONTENT GRADIENT ON PHYSICAL & MECHANICAL PROPERTIES OF PARTICLEBOARD
by: Abolfazl Kargarfard, et al.
Published: (2005-05-01)

Effects of Steaming, Drying Temperature, and Adhesive Type on Static Bending Properties of LVL made of Picea orientalis and Abies nordmanniana veneers
by: Huseyin Peker, et al.
Published: (2014-11-01)

Effect of Cyclic Loading on the Elasticity of Beech Solid and Laminated Wood
by: Milan Gaff, et al.
Published: (2014-06-01)

ASSESSMENT OF SELECTED PHYSICAL AND MECHANICAL PROPERTIES OF CEMENT BONDED BOARD PRODUCED FROM Gliricidia sepium (AGUNMANIYE)
by: John Tosin ALADEJANA, et al.
Published: (2016-03-01)

Utilization of Recycled Polyethylene For Physical & Mechanical Properties Modification of Particleboard
by: Abolfazl Kargarfard, et al.
Published: (2016-12-01)

Environmentally-Friendly High-Density Polyethylene-Bonded Plywood Panels
by: Pavlo Bekhta, et al.
Published: (2019-07-01)

THE EFFECTS OF THE FORCE LOADING DIRECTION ON BENDING STRENGTH AND MODULUS OF ELASTICITY IN LAMINATED VENEER LUMBER (LVL)
by: Murat Kılıç
Published: (2011-06-01)

THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES
by: Amir Nourbakhsh, et al.
Published: (2004-10-01)

A STUDY ON DENSITY PROFILE OF THREE TYPES OF MEDIUM DENSITY FIBERBAORD (MDF) USED IN IRAN MARKET
by: Saeid Kazemi najafi, et al.
Published: (2005-12-01)

Aluminum-laminated Panels: Physical and Mechanical Properties
by: Franz Segovia, et al.
Published: (2015-06-01)

Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers
by: Abdollah Najafi, et al.
Published: (2012-06-01)

Properties of Thermoplastic-Bonded Plywood: Effects of the Wood Species and Types of the Thermoplastic Films
by: Pavlo Bekhta, et al.
Published: (2020-11-01)

Comparative analyses of water soaking and thickness swelling of particleboard versus different test methods
by: Điporović-Momčilović Milanka, et al.
Published: (2008-01-01)

Effect of poly (ethylene-co-vinyl acetate) grade on water resistance and mechanical properties of particleboard
by: Salwanee Waelaeh, et al.
Published: (2018-10-01)

The effects of thermal treatment and resin type on physical and mechanical properties of Kenaf stalk particleboard
by: Ali Pesaraklu, et al.
Published: (2013-06-01)

Predictive Models for Modulus of Rupture and Modulus of Elasticity of Particleboard Manufactured in Different Pressing Conditions
by: Tiryaki Sebahattin, et al.
Published: (2017-07-01)

Investigating the possibility of particleboard manufacture using corn (zea mays) stalks
by: Ghoncheh Rassam, et al.
Published: (2014-01-01)

withdrawal strength and bending strangth of L -type of nail′s joint in particleboard and MDF joints.
by: amir lashgari, et al.
Published: (2012-12-01)

Effects of the ratio of mixing the UF adhesive and the UF adhesive with increased reactivity on mechanical properties and the content of formaldehyde
by: Jaroslav Hrázský, et al.
Published: (2009-01-01)

Investigation the possibility of particleboard manufacturing using Hemp stalk
by: Masoudreza Habibi
Published: (2018-03-01)

Investigating of the effect of using bagasse and isocyanate adhesive on the 3-layer particleboard manufacturing
by: Kazem Dost hosseini, et al.
Published: (2011-06-01)

Physical and mechanical properties of particleboards manufactured using charcoal as additives
by: Kowaluk G, et al.
Published: (2017-02-01)

Comparison of predicted thickness swelling of particleboard with fuzzy systems and artificial neural networks
by: علی بیات کشکولی, et al.
Published: (2015-05-01)

INVESTIGATION ON LAMINATED WOOD (LB, LVL) MANUFACTURING
by: Ahmad Jahan latibari, et al.
Published: (2001-01-01)

Study on the effect of urea addition to urea-formaldehyde adhesive on physical and mechanical properties of poplar particleboard
by: Kazem Dosthosseini, et al.
Published: (2012-12-01)

Effect of heat treatment on the physical and mechanical properties of compression and opposite wood of Black pine
by: Türker Dündar, et al.
Published: (2012-11-01)

Study of the mechanical behavior of light mortars produced by thermal treatment, with coal waste of Jerada mine (eastern Morocco)
by: Addou R., et al.
Published: (2019-01-01)

Reliability of Compression Strength of Hennon Bamboo-reinforced Extruded Tubular Particleboard
by: Haiyang Zhang, et al.
Published: (2014-03-01)

Bending Characteristics of Multilayered Soft and Hardwood Materials
by: Tomáš Svoboda, et al.
Published: (2015-11-01)

The Wood of Scots Pine (<i>Pinus sylvestris</i> L.) from Post-Agricultural Lands Has Suitable Properties for the Timber Industry
by: Paweł Kozakiewicz, et al.
Published: (2020-09-01)

Investigation Of press Temperature And press Time On Physical And Mechanical Properties Of OSB Board Made of Aspen
by: Aliakbar Ramtin, et al.
Published: (2008-03-01)

Non-linear Behavior of Polymer Based Composite Laminates under Cyclic Thermal Shock and Its Effects on Residual Stresses
by: ahmad reza Ghasemi, et al.
Published: (2012-12-01)

The effects of some factors on the impact bending strength of laminated veneer lumber
by: Bekir Cihad Bal, et al.
Published: (2012-11-01)