Wide-Gap Brazing of K417G Alloy Assisted by In Situ Precipitation of M<sub>3</sub>B<sub>2</sub> Boride Particles
In this study, K417G Ni-based superalloy with a 20-mm gap was successfully bonded at 1200 °C using powder metallurgy with a powder mixture. The results indicated that the microstructure and mechanical properties of the as-bonded alloy were highly dependent on the brazing time (15–45 min), mainly due...
Main Authors: | Zhun Cheng, Xiaoqiang Li, Minai Zhang, Shengguan Qu, Huiyun Li |
---|---|
Format: | Article |
Language: | English |
Published: |
MDPI AG
2020-07-01
|
Series: | Materials |
Subjects: | |
Online Access: | https://www.mdpi.com/1996-1944/13/14/3140 |
Similar Items
-
Microstructure and Shear Strength of Brazing TiAl/Si<sub>3</sub>N<sub>4</sub> Joints with Ag-Cu Binary Alloy as Filler Metal
by: Duo Dong, et al.
Published: (2018-11-01) -
Improvement for Interfacial Microstructure and Mechanical Properties of Ti<sub>3</sub>SiC<sub>2</sub>/Cu Joint Brazed by Ag-Cu-Ti Filler with Copper Mesh
by: Haiyan Chen, et al.
Published: (2021-04-01) -
Study on Microstructure and Mechanical Properties of WC-10Ni<sub>3</sub>Al Cemented Carbide Prepared by Different Ball-Milling Suspension
by: Minai Zhang, et al.
Published: (2019-07-01) -
Combustion Synthesis of NbB<sub>2</sub>–Spinel MgAl<sub>2</sub>O<sub>4</sub> Composites from MgO-Added Thermite-Based Reactants with Excess Boron
by: Chun-Liang Yeh, et al.
Published: (2020-03-01) -
Research on Residual Stress in Copper/Al<sub>2</sub>O<sub>3</sub> Ceramic/Stainless Steel Composite Structure Brazed Joint
by: LIU Duo, et al.
Published: (2018-03-01)