Crystal Plasticity (Volume II)

Crystal Plasticity (Volume II)

With the second volume, we continue our mission to providing theoretical and experimental research that contribute new insights and practical findings in the field of crystal plasticity-related topics. Once again, a completely new set of 26 original works (including 22 research articles, 3 communica...

Full description

Bibliographic Details
Format:	eBook
Language:	English
Published:	Basel MDPI - Multidisciplinary Digital Publishing Institute 2023
Subjects:	Physics Research & information: general {100} 21-4N valve steel 3D FEM aluminum analysis of variance anisotropic materials anisotropy Bi-Sn alloy brass-type shear band close-packed phases cold rolling cold-rolling texture constitutive law constitutive modeling constitutive relation cooling rate coplanar slip copper alloy corotational derivative coupled temperature-displacement coupling damage crystal plasticity crystallographic orientation crystallographic plasticity Cu-Zn alloy DAMASK deformation behavior different grades diffusion dislocations dual-phase steel dynamic strain aging ECAP FCC phase FeC alloy FeNiCoAlTi FeNiCoAlTiNb finite element simulations first principles forming limit diagrams fusion zone geometrically necessary dislocation Goss gradient materials grain boundary heat input high angular resolution electron back scatter diffraction high purity titanium Johnson-Cook model Keeler-Brazier approach large strain laser weld liquidus projection low alloy steel low-cycle fatigue M-K approach magnesium martensitic transformation mechanical alloying mechanical alloying (MA) mechanical properties mechanical twinning meso scale Mg-based alloy microhardness microstructure molecular dynamic motion decomposition multi-scale modeling multilevel models n/a Nano (Ti,Cr)C powder nanostructure nickel nickel-based superalloy nickel-free austenitic stainless steel phase diagram phase transition plastic deformation pole figure polycrystalline Cu6Sn5 powder metallurgy pre-damage processing and parameters profile analysis residual stresses resin pigment blends rhenium RSD Schmid factor self-annealing shape memory alloys shape memory effect simulate r egression models slip slip band slip system modelling statistically stored dislocation strain homogeneity strain rate strain-gradient crystal plasticity structural properties superalloys superelasticity superplasticity Taylor model temperature tensile properties thermodynamic modeling Ti2AlNb alloy TKD transformation matrix tube high-pressure shearing twin volume fraction twin-matrix lamellae twinning ultra-thin grain-oriented silicon steel (UTGO) vacuum hot pressing whole powder pattern modeling X-ray diffraction Young's moduli zirconium γ'- and γ-phases
Online Access:	Open Access: DOAB: description of the publication Open Access: DOAB, download the publication

Similar Items

Coexistence of multi-deformation modes in beta Ti alloys with improved yielding strength and ductility
by: Chen Guanfang, et al.
Published: (2020-01-01)

Nanoscale Twinned Ti-44Al-4Nb-1.5Mo-0.007Y Alloy Promoted by High Temperature Compression with High Strain Rate
by: Wenqi Guo, et al.
Published: (2018-08-01)

HIGH STRAIN RATE BEHAVIOUR OF AN AZ31 + 0.5 Ca MAGNESIUM ALLOY
by: Josef Pešička, et al.
Published: (2012-01-01)

HIGH STRAIN RATE BEHAVIOUR OF AN AZ31 + 0.5 Ca MAGNESIUM ALLOY
by: Zuzanka Trojanová, et al.
Published: (2012-01-01)

Effect of Mo and Ta on the Mechanical and Superelastic Properties of Ti-Nb Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering
by: Damian Kalita, et al.
Published: (2021-05-01)

A Dislocation-Scale Characterization of the Evolution of Deformation Microstructures around Nanoindentation Imprints in a TiAl Alloy
by: Antoine Guitton, et al.
Published: (2018-02-01)

Evolution of Microstructure in Rolled Mg-Based Alloy. Textural Aspect / Ewolucja Mikrostruktury W Walcowanym Stopie Na Bazie Mg. Aspekt Teksturowy
by: Drzymała P., et al.
Published: (2015-12-01)

Thermomechanical fatigue of Mar-M247: extension of a unified constitutive and life model to higher temperatures
by: Brindley, Kyle A.
Published: (2014)

Study of the non-linear stress-strain behavior in Ti-Nb-Zr alloys
by: Sergio Schneider, et al.
Published: (2005-12-01)

Influence of Volume Fraction of Long-Period Stacking Ordered Structure Phase on the Deformation Processes during Cyclic Deformation of Mg-Y-Zn Alloys
by: Daria Drozdenko, et al.
Published: (2021-12-01)

A Novel γ′-Strengthened Nickel-Based Superalloy for Laser Powder Bed Fusion
by: Jinghao Xu, et al.
Published: (2020-11-01)

Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structure
by: Min Ji Jang, et al.
Published: (2017-09-01)

Strain-Rate-Dependent Tensile Response of Ti–5Al–2.5Sn Alloy
by: Bin Zhang, et al.
Published: (2019-02-01)

High-temperature characteristics of 20MnB4 and 30MnB4 micro-addition cold upsetting steels and C45 and C70 high-carbon-steels
by: S. Sawicki, et al.
Published: (2016-10-01)

Tensile And Low Cycle Fatigue Behavior Of A Ni-Base Superalloy
by: Gopinath, K
Published: (2009)

A Constitutive Relation Based on the Johnson–Cook Model for Ti-22Al-23Nb-2(Mo, Zr) Alloy at Elevated Temperature
by: Yanju Wang, et al.
Published: (2021-06-01)

Effect of Heat Treatment on Microstructures and Mechanical Properties of a Novel β-Solidifying TiAl Alloy
by: Ning Cui, et al.
Published: (2019-05-01)

Characterization of Deformation Mechanisms in Mg Alloys by Advanced Acoustic Emission Methods
by: Jan Čapek, et al.
Published: (2018-08-01)

Deformation Micro-mechanisms of Simple and Complex Concentrated FCC Alloys
by: Komarasamy, Mageshwari
Published: (2015)

Modeling of structural and thermodynamics properties of sigma-phase for the Fe-Cr system
by: Udovskya A., et al.
Published: (2012-01-01)

High Strain Rate Characterization of Advanced High Strength Steels
by: Thompson, Alan
Published: (2007)

High Strain Rate Characterization of Advanced High Strength Steels
by: Thompson, Alan
Published: (2007)

Strengthening mechanism of TiC/Al composites using Al-Ti-C/CNTs with doping alloying elements (Mg, Zn and Cu)
by: Hongyu Yang, et al.
Published: (2020-05-01)

Quantitative Shape-Classification of Misfitting Precipitates during Cubic to Tetragonal Transformations: Phase-Field Simulations and Experiments
by: Yueh-Yu Lin, et al.
Published: (2021-03-01)

Experimentally validated constitutive model for NiTi-based shape memory alloys featuring intermediate R-phase transformation: A case study of Ni48Ti49Fe3
by: M. Frost, et al.
Published: (2021-05-01)

Effect of heat treatment on Fe-B-Si-Nb alloy powder prepared by mechanical alloying
by: Rodrigo Estevam Coelho, et al.
Published: (2005-06-01)

Tuning microstructure, transformation behavior, mechanical/functional properties of Ti–V–Al shape memory alloy by doping quaternary rare earth Y
by: Xiaoyang Yi, et al.
Published: (2021-04-01)

The Hardness of Additively Manufactured Alloys
by: J.S. Zuback, et al.
Published: (2018-10-01)

Strong grain-size effect on deformation twinning of an Al0.1CoCrFeNi high-entropy alloy
by: S. W. Wu, et al.
Published: (2017-07-01)

Microstructural Evolution, Thermal Stability and Microhardness of the Nb–Ti–Si-Based Alloy during Mechanical Alloying
by: Lijing Zhang, et al.
Published: (2018-05-01)

Reconciling viability and cost-effective shape memory alloy options – A review of copper and iron based shape memory metallic systems
by: Kenneth Kanayo Alaneme, et al.
Published: (2016-09-01)

The Microstructural Evolution, Tensile Properties, and Phase Hardness of a TiAl Alloy with a High Content of the β Phase
by: Ning Cui, et al.
Published: (2019-08-01)

A high-Nb TiAl alloy with highly refined microstructure and excellent mechanical properties fabricated by electromagnetic continuous casting
by: Yong-zhe Wang, et al.
Published: (2016-09-01)

Effect of Fe Addition on Microstructure and Mechanical Properties of As-cast Ti<sub>49</sub>Ni<sub>51</sub> Alloy
by: Peiyou Li, et al.
Published: (2019-09-01)

Structure and Martensitic Transformation in Rapidly Solidified CoNiAlFe Alloy
by: Huiling Chen, et al.
Published: (2017-11-01)

Influence of High Strain Rate Compression on Microstructure and Phase Transformation of NiTi Shape Memory Alloys
by: Qiu, Ying
Published: (2016)

Estudo de mecanismos de propagacao de discordancias em intermetalicos ordenados Nisub3Al pelo metodo de atrito interno
by: MOURISCO, AROLDO J.
Published: (1999)

Estudo de mecanismos de propagacao de discordancias em intermetalicos ordenados Nisub3Al pelo metodo de atrito interno
by: MOURISCO, AROLDO J.
Published: (1999)

Precipitation Behavior of Orthorhombic Phase in Ti-22Al-25Nb Alloy during Slow Cooling Aging Treatment and Its Effect on Tensile Properties
by: Beibei Wei, et al.
Published: (2020-11-01)

Thermodynamic calculations in alloys Ti-Al, Ti-Fe, Al-Fe and Ti-Al-Fe
by: Kostov Ana, et al.
Published: (2008-01-01)

Cannot write session to /tmp/vufind_sessions/sess_3nk37011veoa1quqm554f7fjuj