Research Progress in High-Performance Magnesium Alloy and Its Applications

Research Progress in High-Performance Magnesium Alloy and Its Applications

Mg alloy is the lightest metallic structural material and possesses the advantages of high specific strength, high specific stiffness, good electromagnetism shield, good damping capacity, good machinability, and easy recycling, etc. Therefore, it has extremely broad application prospects and has dra...

Full description

Bibliographic Details
Format:	eBook
Language:	English
Published:	MDPI - Multidisciplinary Digital Publishing Institute 2023
Subjects:	History of engineering and technology Materials science Technology: general issues {10-12} twin Al-Mg alloys annealing backward extrusion biocompatibility boride Ca2Mg6Zn3 phase cold metal transfer combustion compression constitutive model corrosion behaviors corrosion resistance dynamic recrystallization kinetics failure mechanism filler material flame temperature grain refinement high strength and toughness high temperature cross-rolling hot deformation ignition implantable bio-metal materials magnesium alloy mechanical alloying mechanical properties Mg alloy Mg-Bi-Ca alloy Mg-Gd-Y alloy Mg-Zn-Mn-Ca MgB2 microstructure microstructure modification multidirectional impact forging n/a orthogonal experiment random orientation room temperature scandium SKPFM stretch formability surface coating modification tensile strength texture twinning welding wire arc additive manufacturing
Online Access:	Open Access: DOAB: description of the publication Open Access: DOAB, download the publication

Similar Items

Corrosion Resistance of Mg<sub>72</sub>Zn<sub>24</sub>Ca<sub>4</sub> and Zn<sub>87</sub>Mg<sub>9</sub>Ca<sub>4</sub> Alloys for Application in Medicine
by: Andrzej Fijołek, et al.
Published: (2020-08-01)

A near-isotropic ultrafine-grained Mg-Gd-Ag alloy with high strength-ductility synergy
by: Bingqian Xu, et al.
Published: (2020-11-01)

Effect of the Zn/Mg Ratio on Microstructures, Mechanical Properties and Corrosion Performances of Al-Zn-Mg Alloys
by: Keda Jiang, et al.
Published: (2020-07-01)

Microstructure and mechanical and corrosion properties of hot-extruded Mg–Zn–Ca–(Mn) biodegradable alloys
by: V.E. Bazhenov, et al.
Published: (2021-07-01)

Effects of solidification cooling rate on the corrosion resistance of Mg–Zn–Ca alloy
by: Debao Liu, et al.
Published: (2014-10-01)

The Effect of Zn on the Properties of Mg-10Al-6Ca-1Sn Alloy
by: IOP, et al.
Published: (2020)

Microstructure-corrosion behaviour relationship of micro-alloyed Mg-0.5Zn alloy with the addition of Ca, Sr, Ag, In and Cu
by: Yiming Jin, et al.
Published: (2020-10-01)

Influence of microstructure on the formability of Al-Mg6.8 alloy
by: Minov Boris G., et al.
Published: (2008-01-01)

Microstructure, mechanical and corrosion properties of Mg–2Dy–xZn (x=0, 0.1, 0.5 and 1 at.%) alloys
by: Guangli Bi, et al.
Published: (2014-03-01)

Effect of micro-alloying Ca on microstructure, texture and mechanical properties of Mg–Zn–Y–Ce alloys
by: Xiaofang Liu, et al.
Published: (2020-04-01)

Effect of extrusion speed on microstructure and mechanical properties of the Mg-Ca binary alloy
by: Jingren Li, et al.
Published: (2021-07-01)

Effects of minor Sr addition on as-cast microstructure and mechanical properties of a Mg-3Sn-2Ca (wt.%) magnesium alloy
by: Yang Mingbo, et al.
Published: (2014-03-01)

Production of Al/Mg-Li composite by the accumulative roll bonding process
by: Davood Rahmatabadi, et al.
Published: (2020-07-01)

Analysis and Characterization on Dynamic Recrystallization in Casting AZ31 Mg Alloys Under Plane Strain Compression
by: Li Xu, et al.
Published: (2020-01-01)

Effects of minor RE (Y, La) on microstructure and corrosion behavior of TX31 alloys
by: Chunming Wang, et al.
Published: (2021-09-01)

Reasonable utilization of {10-12} twin for optimizing microstructure and improving mechanical property in a Mg-Gd-Y alloy
by: S.H. Lu, et al.
Published: (2020-06-01)

Surface Morphologies and Mechanical Properties of Mg-Zn-Ca Amorphous Alloys under Chemistry-Mechanics Interactive Environments
by: Yongyan Li, et al.
Published: (2019-03-01)

Enhancing the Corrosion Resistance and Mechanical Properties of a High-Alloying Al-Zn-Mg-Cu-Zr Alloy by Ce Addition and Aging Treatment
by: Xinxiang Yu, et al.
Published: (2020-10-01)

Ca and Ce Effect on the Corrosion Resistance of Hot-Rolled AZ31 Mg Alloys
by: I. H. Kara, et al.
Published: (2020-02-01)

Development Of Cast Magnesium Alloys With Improved Strength
by: Shrikant, Joshi Sameehan
Published: (2014)

The Influence of Strontium on the Microstructure of Cast Magnesium Alloys Containing Aluminum and Calcium
by: Rzychoń T., et al.
Published: (2015-04-01)

Strengthening Effects of Zn Addition on an Ultrahigh Ductility Mg-Gd-Zr Magnesium Alloy
by: Yaobo Hu, et al.
Published: (2018-10-01)

The Effects of Multi-Stage Homogenizations on the Microstructures and Mechanical Properties of Al–Zn–Mg–Zr–Sc Alloys
by: Yang-Chun Chiu, et al.
Published: (2021-01-01)

Aluminum Alloys and Aluminum-Based Matrix Composites
Published: (2023)

Effects of Zn on Corrosion Properties of Homogenized Mg-3Sn-1Ca-1Cu Alloy
by: Fu, L., et al.
Published: (2022)

Effects of Second Phases on Microstructure, Microhardness, and Corrosion Behavior of Mg-3Sn-(1Ca) Alloys
by: Chunming Wang, et al.
Published: (2019-08-01)

A comparison study of Ce/La and Ca microalloying on the bio-corrosion behaviors of extruded Mg-Zn alloys
by: J.H. Chu, et al.
Published: (2020-12-01)

Microstructure Evolution of Mg-Gd-Y-Zn-Zr Magnesium Alloy During Partial Remelting
by: Jianquan TAO, et al.
Published: (2014-12-01)

Effect of Isothermal Repetitive Upsetting Extrusion on the Microstructure of Mg-12.0Gd-4.5Y-2.0Zn-0.4Zr Alloy
by: Guanshi Zhang, et al.
Published: (2018-10-01)

Microstructures and mechanical properties of as-extruded Mg–5Sn–1Zn–xAl (x=1, 3 and 5) alloys
by: Jia She, et al.
Published: (2015-08-01)

Effect of Ca addition on modification of primary Mg2Si, hardness and wear behavior in Mg–Si hypereutectic alloys
by: M.E. Moussa, et al.
Published: (2014-09-01)

Corrosion inhibition study of AZ31 Mg alloy by Vanadate, Selenite and Phosphate
by: Feng, Zhiyuan
Published: (2019)

Effect of Gd addition on the age hardening response of Mg–6Zn-1Mn alloy
by: Yang Zhao, et al.
Published: (2020-07-01)

Impact of Wound Closure on the Corrosion Rate of Biodegradable Mg-Ca-Zn Alloys in the Oral Environment
by: Ali Modabber, et al.
Published: (2020-09-01)

Evolution Of Texture And Its Correlation With Microstructure And Mechanical Property Anisotropy In AA7010 Aluminum Alloy
by: Mondal, Chandan
Published: (2016)

The Influence of Aluminum on the Microstructure and Hardness of Mg-5Si-7Sn Alloy
by: Rzychoń T., et al.
Published: (2016-03-01)

Effect of Gd addition on mechanical and microstructural properties of Mg-xGd-2.6Nd-0.5Zn-0.5Zr cast alloys
by: Liang Zhan, et al.
Published: (2020-05-01)

Enhancement of Strength and Hot Workability of AZX312 Magnesium Alloy by Disintegrated Melt Deposition (DMD) Processing in Contrast to Permanent Mold Casting
by: Kamineni Pitcheswara Rao, et al.
Published: (2018-06-01)

Reducing the tension–compression yield asymmetry of extruded Mg–Zn–Ca alloy via equal channel angular pressing
by: L.B. Tong, et al.
Published: (2015-12-01)

Effect of microstructure evolution on mechanical property of extruded Mg–12Gd–2Er–1Zn–0.6Zr alloys
by: Kai Wen, et al.
Published: (2015-03-01)