Scandium Effect on Increasing Mechanical Properties of Aluminum Alloys

by Milman, Yu.V.
Published 2006-04-01

Application of the plasticity characteristic determined by the indentation technique for evaluation of mechanical properties of coatings: II. guidelines to coating development and...

by Byakova A.V., Milman YU.V., Vlasov A.A.
Published 2004-01-01

Application of the plasticity characteristic determined by the indentation technique for evaluation of mechanical properties of coatings: I. specific features of the test method pr...

by Byakova A.V., Milman Yu.V., Vlasov A.A.
Published 2004-01-01

Construction of stess-strain curves for brittle materials by indentation in a wide temperature range

by Milman Yu.V., Gridneva I.V., Golubenko A.A.
Published 2007-01-01

Plasticity Characteristic Obtained by Indentation Technique for Crystalline and Noncrystalline Materials in the Wide Temperature Range

by Milman, Yu.V., Chugunova, S.I., Goncharova, I.V.
Published 2006-04-01

A nanoindentation study of magnetron co-sputtered nanocrystalline ternary nitride coatings

by Yeung W.Y., Dub S.N., Wuhrer R., Milman Yu.V.
Published 2006-01-01

Cold-sprayed Coatings based on High Strength Aluminium Alloys Reinforced By Quasicrystalline Particles: Microstructure and Key Properties

by Byakova, A.V., Kiz, M.M., Sirko, A.I., Yakovleva, M.S., Milman, Yu.V.
Published 2010-12-01

High Strength Aluminum Alloys Reinforced by Nanosize Quasicrystalline Particles for Elevated Temperature Application

by Milman, Yu.V., Sirko, A.I., Iefimov, M.O., Niekov, O.D., Sharovsky, A.O., Zacharova, N.P.
Published 2006-04-01

Structure and High-Temperature Properties of the Alloyed Quasicrystalline Al-Cu-Fe Powders and Thermal-Sprayed Coatings from Them

by Iefimov, M.O., Lotsko, D.V., Milman, Yu.V., Borisova, A.L., Chugunova, S. J., Astakhov, Ye.A., Neikov, O.D.
Published 2006-04-01

New Light-weight Eutectic Alloys Based on L12 Cubic Aluminum Intermetallics with Enhanced Heat Resistance

by Milman, Yu.V., Barabash, O.M., Korzhova, N.P., Legkaya, T.N., Mordovets, N.M., Podrezov, Yu.N., Poryadchenko, N.E., Voskoboinik, I.V.
Published 2006-04-01