Simulation Model for Correction and Modeling of Probe Head Errors in Five-Axis Coordinate Systems

by Adam Gąska, Piotr Gąska, Maciej Gruza
Published 2016-05-01

Challenges for Modeling of Five-Axis Coordinate Measuring Systems

by Piotr Gąska, Adam Gąska, Maciej Gruza
Published 2017-08-01

Selection of Optimal Path Control Algorithms for Probe Heads Used on Five-Axis Measuring Systems

by Adam Gąska, Piotr Gąska, Maciej Gruza, Jerzy Sładek
Published 2018-12-01

Simple Optical Coordinate Measuring System, Based on Fiducial Markers Detection, and its Accuracy Assessment

by Piotr Gąska, Wiktor Harmatys, Maciej Gruza, Adam Gąska, Jerzy Sładek
Published 2020-12-01

DETERMINATION OF CALIBRATION SPHERE PARAMETERS INFLUENCE ON THE RESULTS OF ARTICULATING PROBE HEAD QUALIFICATION

by Maciej Gruza, Adam Gąska, Piotr Gąska, Wiktor Harmatys, Jerzy Sładek
Published 2018-06-01

DETERMINATION OF TEMPERATURE IMPACT ON CMM RESIDUAL KINEMATIC ERRORS DISTRIBUTION

by Wiktor Harmatys, Piotr Gąska, Adam Gąska, Maciej Gruza, Jerzy Sładek
Published 2015-05-01

ANALYSIS OF Z-AXIS KINEMATICS INFLUENCE ON MEASUREMENT RESULT

by Maciej Gruza, Wiktor Harmatys, Piotr Gąska, Adam Gąska, Jerzy Sładek
Published 2015-05-01

Analysis of Measured Workpiece's Form Errors Influence on the Accuracy of Probe Heads Used on Five-Axis Measuring Systems

by Wiktor Harmatys, Adam Gąska, Maciej Gruza, Piotr Gąska, Jerzy Sładek
Published 2017-12-01

Assessment of the Impact of Probe Head Hysteresis on the Accuracy of Five-Axis Coordinate Measuring Systems

by Piotr Gąska, Maciej Gruza, Adam Gąska, Wiktor Harmatys, Jerzy Sładek
Published 2017-09-01

IDENTIFICATION AND CORRECTION OF COORDINATE MEASURING MACHINE GEOMETRICAL ERRORS USING LASERTRACER SYSTEMS

by Adam Gąska, Maciej Gruza, Piotr Gąska, Michał Karpiuk, Jerzy Sładek
Published 2013-12-01

Simple method for articulated arm coordinate measuring machines task-specific accuracy assessment

by Adam Gąska, Piotr Gąska, Wiktor Harmatys, Maciej Gruza, Jerzy Sładek
Published 2021-12-01

Assessment of Background Illumination Influence on Accuracy of Measurements Performed on Optical Coordinate Measuring Machine Equipped with Video Probe

by Wiktor Harmatys, Adam Gąska, Piotr Gąska, Maciej Gruza, Jerzy A. Sładek
Published 2021-04-01

Assessment of Influence of Sample Averaging on Accuracy of Point Coordinates Measurement Performed Using Laser Tracking Systems

by Maciej Gruza, Piotr Gąska, Adam Gąska, Wiktor Harmatys, Michał Jedynak, Konrad Kobiela
Published 2019-12-01

Development of a Coordinate Measuring Machine—Based Inspection Planning System for Industry 4.0

by Slavenko M. Stojadinovic, Vidosav D. Majstorovic, Adam Gąska, Jerzy Sładek, Numan M. Durakbasa
Published 2021-09-01